Had a friend at the dispatch company stop by and let us use an Anritsu. It's a very high power signal at 911.5. And it's very narrow, either 1 or 10khz. Maybe 5. I'm tired. On the street with a little 10dBi M2 yagi, we couldn't add enough attenuation to get it to stop overloading even the analyzer. At least we have a general idea where it's coming from. But obviously it's overloading the front end on our Canopy AP, which is at 150' and probably two blocks away. I doubt it's anything amateur. This is retarded. I fucking hate 900!

Some googling says 911.5 could be a transponder, locator, HID kinda thing. But it popped up on Saturday at at 1:30 in the afternoon. It was also 101 degrees outside then. I have to wonder if there's a power co transformer or a line spitting out crap somewhere like a spark-gap transmitter.

On 6/13/2016 7:27 PM, Jay Weekley wrote:
I imagine it could be stronger than that. Looks like the scale stops at -35

Sean Heskett wrote:
whatever it is, it has to be right on the same site as you or aimed right at you since it's at a -35 :-/

On Mon, Jun 13, 2016 at 2:56 PM, George Skorup <[email protected] <mailto:[email protected]>> wrote:

    Thanks. Not sure why I didn't find that.

    Not sure what this is, but it sucks. We were on 912 and someone
    decided to get right on top of us. Now we're at 923 and I can
    keep only one customer registered (because he's at -45). Looks
    like we're going to have to abandon 900 at this site.



    On 6/13/2016 3:30 PM, Micah Miller wrote:
    I believe that this will answer your question:
    
https://community.ubnt.com/t5/Wireless-Networking/Ubiquiti-900-Mhz-frequencies/td-p/454763

    On Mon, Jun 13, 2016 at 2:56 PM, George Skorup<[email protected]> 
<mailto:[email protected]>  wrote:
    Anybody know offhand what the carrier frequencies are for the UBNT M900 at
    the various channel widths. Is 911 one of them?




Reply via email to