External attenuators inline with the yagi cable will do the trick.  Try 40 dB 
or 60 dB.

http://www.ebay.com/itm/N-attenuator-N-male-to-N-female-connector-adapter-30-dB-2W-US-Stock-Fast-Ship-/111548631490?hash=item19f8d109c2:g:9kwAAOSw2XFUje1R

Lots of places can ship these overnight.

With a handheld receiver and a vertical rubber duck antenna, you can put it 
against your body, wrap your hand around the antenna and rotate your body to 
see where the signal direction is the strongest.  Local hams love to do a 
transmitter hunt.  The actually organize these events for fun.  Find one and 
they will find it for  you.  

From: George Skorup 
Sent: Monday, June 13, 2016 8:59 PM
To: [email protected] 
Subject: Re: [AFMUG] UBNT 900 channels

Had a friend at the dispatch company stop by and let us use an Anritsu. It's a 
very high power signal at 911.5. And it's very narrow, either 1 or 10khz. Maybe 
5. I'm tired. On the street with a little 10dBi M2 yagi, we couldn't add enough 
attenuation to get it to stop overloading even the analyzer. At least we have a 
general idea where it's coming from. But obviously it's overloading the front 
end on our Canopy AP, which is at 150' and probably two blocks away. I doubt 
it's anything amateur. This is retarded. I fucking hate 900!

Some googling says 911.5 could be a transponder, locator, HID kinda thing. But 
it popped up on Saturday at at 1:30 in the afternoon. It was also 101 degrees 
outside then. I have to wonder if there's a power co transformer or a line 
spitting out crap somewhere like a spark-gap transmitter.


On 6/13/2016 7:27 PM, Jay Weekley wrote:

  I imagine it could be stronger than that.  Looks like the scale stops at -35


  Sean Heskett wrote:

    whatever it is, it has to be right on the same site as you or aimed right 
at you since it's at a -35 :-/

    On Mon, Jun 13, 2016 at 2:56 PM, George Skorup <[email protected]> wrote:

      Thanks. Not sure why I didn't find that.

      Not sure what this is, but it sucks. We were on 912 and someone decided 
to get right on top of us. Now we're at 923 and I can keep only one customer 
registered (because he's at -45). Looks like we're going to have to abandon 900 
at this site.




      On 6/13/2016 3:30 PM, Micah Miller wrote:

I believe that this will answer your question:
https://community.ubnt.com/t5/Wireless-Networking/Ubiquiti-900-Mhz-frequencies/td-p/454763

On Mon, Jun 13, 2016 at 2:56 PM, George Skorup mailto:[email protected] wrote:
Anybody know offhand what the carrier frequencies are for the UBNT M900 at
the various channel widths. Is 911 one of them?






Reply via email to