Actually i was just thinking, Do you think that medusa could be done in
900mhz? With the better interference rejection due to the beam steering and
usually the 900mhz customers are spread out everywhere this might be a
godsend for 900. Only wonder how big the sector antenna will be.....
On Wed, Jun 22, 2016 at 11:04 PM, Forrest Christian (List Account) <
li...@packetflux.com> wrote:
> That is why they said 'about 3-4 times the throughput'.
>
> The better the spacial diversity the better the throughput - they can get
> 7x if everything is aligned correctly.
>
> You also need to remember that these aren't fixed beams - they're
> dynamically pointable, and my understanding is that it can be re-pointed in
> each timeslot, so as long as all of your customers aren't in a very narrow
> slice, and are relatively spread out, you should gain something.
>
> The other thought is that this is going to encourage people to move to as
> wide of sector as possible to improve the beamsteering performance.
>
> On Wed, Jun 22, 2016 at 11:33 AM, Kurt Fankhauser <
> lists.wavel...@gmail.com> wrote:
>
>> So if i have a tower like the one below with customers spaced out
>> accordingly, alot of the customers are going to fall wthin 1 or 2 of the 6
>> degree "strip patches" on the antenna and thus i wont see as much
>> throughput increase per AP? :(
>>
>> On Wed, Jun 22, 2016 at 1:28 PM, Bill Prince <part15...@gmail.com> wrote:
>>
>>> You can't do that kind of spatial diversity in a PTP link.
>>>
>>>
>>> bp
>>> <part15sbs{at}gmail{dot}com>
>>>
>>>
>>> On 6/22/2016 10:11 AM, Kurt Fankhauser wrote:
>>>
>>> Will there be a PTP version of Medusa that can triple the throughput of
>>> existing PTP650 links on the same channel width? I am wondering why the
>>> same massive-mimo can't be applied to PTP so a 450mbps PTP650 link running
>>> on 45mhz channel can then achieve 1.35Gbps on the same 45mhz channel?
>>>
>>> On Wed, Jun 22, 2016 at 1:05 PM, Josh Luthman <
>>> j...@imaginenetworksllc.com> wrote:
>>>
>>>> Are these uplink and downlink?
>>>>
>>>> The epmp 2000 is only uplink.
>>>>
>>>> Josh Luthman
>>>> Office: 937-552-2340
>>>> Direct: 937-552-2343
>>>> 1100 Wayne St
>>>> Suite 1337
>>>> Troy, OH 45373
>>>> On Jun 22, 2016 12:54 PM, "Peter Kranz" <pkr...@unwiredltd.com> wrote:
>>>>
>>>>> With the ETI beamformer antenna.. you get ~20db gain since you have
>>>>> the electrical capture of all the active antennas going on.. in theory
>>>>> creating a high gain very narrow spot beam of 15 degrees or so.. 14
>>>>> implies
>>>>> something else..
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> *Peter Kranz * <http://www.unwiredltd.com/>www.UnwiredLtd.com
>>>>> Desk: 510-868-1614 x100 <510-868-1614%20x100>
>>>>> Mobile: 510-207-0000
>>>>> pkr...@unwiredltd.com
>>>>>
>>>>>
>>>>>
>>>>> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Bill Prince
>>>>> *Sent:* Wednesday, June 22, 2016 9:51 AM
>>>>> *To:* af@afmug.com
>>>>> *Subject:* Re: [AFMUG] 450m
>>>>>
>>>>>
>>>>>
>>>>> They beam-form the power coming in.
>>>>>
>>>>>
>>>>>
>>>>> bp
>>>>>
>>>>> <part15sbs{at}gmail{dot}com>
>>>>>
>>>>>
>>>>>
>>>>> On 6/22/2016 9:40 AM, Craig Schmaderer wrote:
>>>>>
>>>>> Over poe though? That’s pushing a lot of watts over it, I didn’t hear
>>>>> them say it had a separate power port?
>>>>>
>>>>>
>>>>>
>>>>> *From:* Af [mailto:af-boun...@afmug.com <af-boun...@afmug.com>] *On
>>>>> Behalf Of *Josh Reynolds
>>>>> *Sent:* Wednesday, June 22, 2016 11:40 AM
>>>>> *To:* af@afmug.com
>>>>> *Subject:* Re: [AFMUG] 450m
>>>>>
>>>>>
>>>>>
>>>>> 48v to 56 or 59v I believe
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Jun 22, 2016 at 11:38 AM, Craig Schmaderer <
>>>>> <cr...@skywaveconnect.com>cr...@skywaveconnect.com> wrote:
>>>>>
>>>>> Spec sheet says 70watts, how are we going to power this thing, they
>>>>> never said the power options did they?
>>>>>
>>>>>
>>>>>
>>>>> *From:* Af [mailto: <af-boun...@afmug.com>af-boun...@afmug.com] *On
>>>>> Behalf Of *Daniel White
>>>>> *Sent:* Wednesday, June 22, 2016 11:37 AM
>>>>>
>>>>>
>>>>> *To:* <af@afmug.com>af@afmug.com
>>>>> *Subject:* Re: [AFMUG] 450m
>>>>>
>>>>>
>>>>>
>>>>> Yes there is a GigE roadmap that includes 40MHz channels.
>>>>>
>>>>>
>>>>>
>>>>> Daniel White
>>>>>
>>>>> Managing Director – Hardware Distribution Sales
>>>>>
>>>>> ConVergence Technologies
>>>>>
>>>>> Cell: +1 (303) 746-3590 <%2B1%20%28303%29%20746-3590>
>>>>>
>>>>> <dwh...@converge-tech.com>dwh...@converge-tech.com
>>>>>
>>>>>
>>>>>
>>>>> *From:* Af [ <af-boun...@afmug.com>mailto:af-boun...@afmug.com
>>>>> <af-boun...@afmug.com>] *On Behalf Of *Kurt Fankhauser
>>>>> *Sent:* Wednesday, June 22, 2016 10:30 AM
>>>>> *To:* <af@afmug.com>af@afmug.com
>>>>> *Subject:* Re: [AFMUG] 450m
>>>>>
>>>>>
>>>>>
>>>>> Any plans to offer 40mhz channel on this thing for 800-1000mbps
>>>>> throughput?
>>>>>
>>>>>
>>>>>
>>>>> On Wed, Jun 22, 2016 at 12:22 PM, Mike Hammett < <af...@ics-il.net>
>>>>> af...@ics-il.net> wrote:
>>>>>
>>>>> That does a lot of nothing now.
>>>>>
>>>>>
>>>>>
>>>>> -----
>>>>> Mike Hammett
>>>>> Intelligent Computing Solutions <http://www.ics-il.com/>
>>>>> <https://www.facebook.com/ICSIL>
>>>>> <https://plus.google.com/+IntelligentComputingSolutionsDeKalb>
>>>>> <https://www.linkedin.com/company/intelligent-computing-solutions>
>>>>> <https://twitter.com/ICSIL>
>>>>> Midwest Internet Exchange <http://www.midwest-ix.com/>
>>>>> <https://www.facebook.com/mdwestix>
>>>>> <https://www.linkedin.com/company/midwest-internet-exchange>
>>>>> <https://twitter.com/mdwestix>
>>>>> The Brothers WISP <http://www.thebrotherswisp.com/>
>>>>> <https://www.facebook.com/thebrotherswisp>
>>>>>
>>>>>
>>>>> <https://www.youtube.com/channel/UCXSdfxQv7SpoRQYNyLwntZg>
>>>>> ------------------------------
>>>>>
>>>>> *From: *"Bill Prince" < <part15...@gmail.com>part15...@gmail.com>
>>>>> *To: * <af@afmug.com>af@afmug.com
>>>>> *Sent: *Wednesday, June 22, 2016 11:21:33 AM
>>>>> *Subject: *Re: [AFMUG] 450m
>>>>>
>>>>> Take whatever you like from here:
>>>>>
>>>>> <https://www.youtube.com/watch?v=YO9JfpcaZRA>
>>>>> https://www.youtube.com/watch?v=YO9JfpcaZRA
>>>>>
>>>>> bp
>>>>>
>>>>> <part15sbs{at}gmail{dot}com>
>>>>>
>>>>>
>>>>>
>>>>> On 6/22/2016 9:17 AM, Matt wrote:
>>>>>
>>>>> There is a webinar going on now as we speak introducing the product.
>>>>>
>>>>> Is there anywhere to download slides or video from the webinar?
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=icon>
>>>>>
>>>>> Virus-free.
>>>>> <https://www.avast.com/sig-email?utm_medium=email&utm_source=link&utm_campaign=sig-email&utm_content=emailclient&utm_term=link>
>>>>> www.avast.com
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>>
>>>>
>>>
>>>
>>
>
>
> --
> *Forrest Christian* *CEO**, PacketFlux Technologies, Inc.*
> Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
> forre...@imach.com | http://www.packetflux.com
> <http://www.linkedin.com/in/fwchristian> <http://facebook.com/packetflux>
> <http://twitter.com/@packetflux>
>
>
