I imagine it takes a lot of processing power to do so and it could be they used most of the spare AF5 FPGA gates for the 1024QAM functionality.
On Aug 11, 2016 12:47 PM, "Mathew Howard" <mhoward...@gmail.com> wrote: > Yeah, it seems to work fine to use slant at one end, and h/v at the other > with ePMP, ubnt M and Canopy 450... But airfibers don't seem to like it at > all. > > On Aug 11, 2016 2:30 PM, "George Skorup" <geo...@cbcast.com> wrote: > >> It's built into the chipset of the ePMP 1000 (which is the same as UBNT >> M). >> >> And think about high multipath indoor environments. You pretty much have >> to rely on phase detection capabilities to get MIMO. >> >> On 8/11/2016 2:17 PM, Chuck McCown wrote: >> >> Yes they did say that, and I read the white paper, and I think I >> understood it at the time. I think they used some kind of special sauce to >> make that true though. I don’t think it would apply to any two radios. >> >> *From:* TJ Trout <t...@voltbb.com> >> *Sent:* Thursday, August 11, 2016 1:09 PM >> *To:* af@afmug.com >> *Subject:* Re: [AFMUG] Using AirFiber 5x dishes with non-Airfiber radios >> >> Didn't cambium say that you can receive slant using a hpol/vpol cpe and >> not loose any performance? Or is that with cambium CPE's only? >> >> On Thu, Aug 11, 2016 at 12:05 PM, Chuck McCown <ch...@wbmfg.com> wrote: >> >>> You lose, but not quite that bad: >>> >>> 20*Log (Cos(angle)) = 3.01 dB >>> >>> >>> *From:* Josh Luthman <j...@imaginenetworksllc.com> >>> *Sent:* Thursday, August 11, 2016 12:59 PM >>> *To:* af@afmug.com >>> *Subject:* Re: [AFMUG] Using AirFiber 5x dishes with non-Airfiber radios >>> >>> BOTH sides should be slant. That's it. >>> >>> One slant and one VH you'll lose I think 15db? >>> >>> >>> Josh Luthman >>> Office: 937-552-2340 >>> Direct: 937-552-2343 >>> 1100 Wayne St >>> Suite 1337 >>> Troy, OH 45373 >>> >>> On Thu, Aug 11, 2016 at 2:57 PM, Paul McCall <pa...@pdmnet.net> wrote: >>> >>>> Probably a dump question, but is there any downside with using a >>>> AF‑5G30‑S45 to use with Mikrotik radios? I wouldn’t expect the X polarity >>>> to hurt performance, but don’t want to assume. >>>> >>>> >>>> >>>> We have some links to put up that long term may become AirFiber 5X >>>> links, thus the thought. >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> Paul McCall, President >>>> >>>> PDMNet, Inc. / Florida Broadband, Inc. >>>> >>>> 658 Old Dixie Highway >>>> >>>> Vero Beach, FL 32962 >>>> >>>> 772-564-6800 >>>> >>>> pa...@pdmnet.net >>>> >>>> www.pdmnet.com >>>> >>>> www.floridabroadband.com >>>> >>>> >>>> >>>> >>>> >>> >>> >> >> >> >>