Sitting back and just comparing the specs, I can believe the results. Both are excellent sectors, but if you do a line by line spec comparison you will see that RF Elements eeks out by a notch.
The only thing to keep in mind is that Cambium is showing 2degree electrical down-tilt, and Rf Element does not have that. Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: [email protected] > From: "Paul McCall" <[email protected]> > To: [email protected] > Sent: Monday, August 15, 2016 2:16:34 PM > Subject: [AFMUG] RF Elements vs. Cambium sectors > I saw an interesting set of test results or someone testing an ePMP 1000 with > RF > Elements 17 db sector vs. Cambium ePMP 2000 with Cambium 2000 sector, and the > performance was actually better with RF elements. Yet, Cambium’s new sector > claims 35dB F/B vs. 29dB for RF Elements. > Anybody using RF Elements sector with ePMP 1000 radios and getting good > results > on F/B GPS Sync issues? I know with the 1000 series, we needed 8 to 15 feet of > vertical separation to make everything run smooth on Frequency re-use. It will > “work” with less. > Anyway, curious if that will be a problem with RF Elements in the same > environment. I see RF elements has some bigger gain sectors as well. > Paul McCall, President > PDMNet, Inc. / Florida Broadband, Inc. > 658 Old Dixie Highway > Vero Beach, FL 32962 > 772-564-6800 > [email protected] > www.pdmnet.com > www.floridabroadband.com
