Yep... My bad

On Aug 15, 2016 4:27 PM, "Faisal Imtiaz" <[email protected]> wrote:

> You see what happens when you try lame humor before the  Tecate !
>
>
> :)
>
> Faisal Imtiaz
> Snappy Internet & Telecom
> 7266 SW 48 Street
> Miami, FL 33155
> Tel: 305 663 5518 x 232
>
> Help-desk: (305)663-5518 Option 2 or Email: [email protected]
>
> ------------------------------
>
> *From: *"Jaime Solorza" <[email protected]>
> *To: *"Animal Farm" <[email protected]>
> *Sent: *Monday, August 15, 2016 5:59:16 PM
> *Subject: *Re: [AFMUG] RF Elements vs. Cambium sectors
>
> Hey... I was attempting lame humor
>
> On Aug 15, 2016 3:55 PM, "Ken Hohhof" <[email protected]> wrote:
>
>> I think he might have been pointing out that if your installer didn’t
>> know about the 2 degree downtilt, it could have been installed with too
>> much downtilt which would adversely affect performance comparisons.
>>
>> Also look at the elevation plots for the 2 products, the Cambium sector
>> is shown as having quite a bit of null fill.
>>
>> Electrical downtilt could also be more consistent at the edges of the
>> sector than mechanical downtilt.
>>
>> RF Elements in their literature touts matching VPOL and HPOL patterns,
>> obviously good for MIMO-B performance.  Those of us who have tried dual pol
>> omnis know the downside of mismatched VPOL and HPOL antenna gain.
>>
>>
>> *From:* Jaime Solorza <[email protected]>
>> *Sent:* Monday, August 15, 2016 4:43 PM
>> *To:* Animal Farm <[email protected]>
>> *Subject:* Re: [AFMUG] RF Elements vs. Cambium sectors
>>
>>
>> Use a washer... Zaz 2 degree downtilt.  Lol
>>
>> On Aug 15, 2016 3:25 PM, "Faisal Imtiaz" <[email protected]>
>> wrote:
>>
>> Sitting back and just comparing the specs, I can believe the results.
>> Both are excellent sectors, but if you do a line by line spec comparison
>> you will see that RF Elements eeks out by a notch.
>>
>> The only thing to keep in mind is that Cambium is showing 2degree
>> electrical down-tilt, and Rf Element does not have that.
>>
>>
>> Regards.
>>
>> Faisal Imtiaz
>> Snappy Internet & Telecom
>> 7266 SW 48 Street
>> Miami, FL 33155
>> Tel: 305 663 5518 x 232
>>
>> Help-desk: (305)663-5518 Option 2 or Email: [email protected]
>>
>> ------------------------------
>>
>> *From: *"Paul McCall" <[email protected]>
>> *To: *[email protected]
>> *Sent: *Monday, August 15, 2016 2:16:34 PM
>> *Subject: *[AFMUG] RF Elements vs. Cambium sectors
>>
>> I saw an interesting set of test results or someone testing an ePMP 1000
>> with RF Elements 17 db sector vs. Cambium ePMP 2000 with Cambium 2000
>> sector, and the performance was actually better with RF elements.  Yet,
>> Cambium’s new sector claims 35dB F/B vs. 29dB for RF Elements.
>>
>>
>>
>> Anybody using RF Elements sector with ePMP 1000 radios and getting good
>> results on F/B GPS Sync issues?  I know with the 1000 series, we needed 8
>> to 15 feet of vertical separation to make everything run smooth on
>> Frequency re-use.  It will “work” with less.
>>
>>
>>
>> Anyway, curious if that will be a problem with RF Elements in the same
>> environment.  I see RF elements has some bigger gain sectors as well.
>>
>>
>>
>> Paul McCall, President
>>
>> PDMNet, Inc. / Florida Broadband, Inc.
>>
>> 658 Old Dixie Highway
>>
>> Vero Beach, FL 32962
>>
>> 772-564-6800
>>
>> [email protected]
>>
>> www.pdmnet.com
>>
>> www.floridabroadband.com
>>
>>
>>
>>
>>
>>
>>
>
>

Reply via email to