Cool. If Chuck likes it, that's all that matters.
Speaking of blue wires.. Generac really pisses me off. All of the 240VAC
control/transfer relay wiring in a lot of their switches is all blue.
Everything. Even the 12VDC side of the relay.
On 8/18/2016 4:27 PM, Chuck McCown wrote:
A man after my heart on those colors. The old Automatic Electric
electro mechanical step switchboards all had blue for –48 and black
for return.
On Aug 18, 2016 1:55 PM, "George Skorup" <[email protected]
<mailto:[email protected]>> wrote:
Copper shield? You mean the orange wires? Except for the larger
twisted red/black on the power supply/UPS/battery wires, my normal
scheme is red = +24v, orange = +48v, blue = -48v, and black is
always common/return.
On 8/18/2016 7:32 AM, Jaime Solorza wrote:
Nice. I would shrink tube that copper shield you wrapped around
cable... We always do... Safer and cleaner
On Aug 17, 2016 10:51 PM, "George Skorup" <[email protected]
<mailto:[email protected]>> wrote:
This is for a retrofit at an ugly FM site. Wiring is a bit
messy, but meh. Used two separate blank panel because I had them.
Traco TSP360-148 + BCM48 (only one I bought, figured might as
well use it; BCMU360 from now on). There's a RSD150C-24
hiding behind the DDFL4U fuse blocks. PacketFlux
2-relay/3-switch module to monitor the status contacts on the
BCM. 10A shunt on the negative side of the battery feed going
into the BCM. PowerInjector + Sync for the 450 cluster. 5ch
PDU on the end feeding GIGE-POE-APCs for an AF24 and an Exalt
ExtendAir G2-11. Still got a bunch of old shit on the tower
which is what the 8-port injector is for.
We'll see how crappily the RB1100 does. Had it sitting around
doing nothing. Might just end up swapping it for an AHx2.
Can't wait to get my hands on Forrest's new injectors so
wiring won't have to be this complicated anymore.
