I think that was AF5X you are thinking about. The GPS sync ePMP have always been 802.3at compliant as far as I know?
On Tue, Aug 30, 2016 at 1:54 PM, SmarterBroadband < li...@smarterbroadband.com> wrote: > How old is the radio? I think there was a change to the power options on > the sync radios at some time. I seem to remember the earlier ones did not > do 48V?? > > > > We run all our sync radios at 48v when using Netonixs. > > > > Adam > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *Chuck McCown > *Sent:* Tuesday, August 30, 2016 8:23 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Powering ePMP > > > > It appears, due to the polarity, this cannot be done. > > Netonix does not have an option to put positive on 7&8. > > So I need to figure out how to put it in a POE passive pass through mode > it appears. > > > > *From:* Jordan Gregory <jgreg...@hive-wireless.com> > > *Sent:* Tuesday, August 30, 2016 9:19 AM > > *To:* af@afmug.com > > *Subject:* Re: [AFMUG] Powering ePMP > > > > Just the standard 48V. 24 isn't enough and the 4pin 48VH isn't necessary. > > > > On Aug 30, 2016 10:16 AM, "Chuck McCown" <ch...@wbmfg.com> wrote: > > It has the GPS puck but I have not connected it yet. Just playing. > > What Netonix poe setting do you use? > > > > *From:* Jordan Gregory <jgreg...@hive-wireless.com> > > *Sent:* Tuesday, August 30, 2016 9:15 AM > > *To:* af@afmug.com > > *Subject:* Re: [AFMUG] Powering ePMP > > > > GPS synced or not? > > My ePMP 1000 w/ GPS are being powered by a netonix. SMs don't work though. > > > > On Aug 30, 2016 10:11 AM, "Chuck McCown" <ch...@wbmfg.com> wrote: > > When powering an ePMP, I notice that the power supply from Cambium shows > 7&8 positive, 4&5 return. > > Is it not possible to power it directly from a Netonix WS-12-DC? >
