The external antenna version is the exact same housing, but with a pair
of N connectors protruding on the side opposite from the cable glands.
------ Original Message ------
From: "Adam Moffett" <dmmoff...@gmail.com>
To: af@afmug.com
Sent: 9/30/2016 12:34:57 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
Like a 45 slant 15dbi panel.
a 10" x 10" diamond with flattened corners.
------ Original Message ------
From: ch...@wbmfg.com
To: "Animal Farm" <af@afmug.com>
Sent: 9/30/2016 12:33:37 PM
Subject: Re: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
What does the CPE look like?
From:Adam Moffett
Sent: Friday, September 30, 2016 10:29 AM
To:Animal Farm
Subject: [AFMUG] I want a "Stinger like" antenna for Wimax CPE
I want to narrow the radiation pattern on Wimax CPE in order to reduce
interference. Higher gain is a bonus, but mostly I want to tune out
interference from other base stations and thereby improve CINR.
Right now all I've got is I can put an external antenna on with coax
jumpers. A dish with a significantly narrower pattern than the
integrated panel is $120-$140 from KP Performance, plus the cost of
the coax jumpers and the labor to seal them.
I'm really missing the Canopy stingers and reflectors right now. If I
could slip something on for $50 I'd be all over it like white on rice.
I'd also just settle for a cheaper external antenna.
Any brilliant ideas?