I have to admit.  UBNT support of SNMP is a complete embarrassment for our 
industry. I like their products but Cambium has done a MUCH better job of 
supporting SNMP up to V3! 

----- Original Message -----
From: "George Skorup" <geo...@cbcast.com>
To: "af" <af@afmug.com>
Sent: Thursday, October 27, 2016 2:07:11 PM
Subject: Re: [AFMUG] SNMP v1 Ubiquiti?

You mean like this?



On 10/27/2016 1:01 PM, Paul Stewart wrote:
> We want to monitor the radios themselves and I was just shocked at the v1 
> support on a device that is “powered by linux” ….
>
> But yes, I’d like to track several things on these radios including 
> throughput, SNR etc .. I’m just starting to look at MIB support now - one 
> example would be tracking what the radio link is capable of (speed wise) 
> which without 64 bit counters is going to be a real problem
>
>
>> On Oct 27, 2016, at 1:36 PM, George Skorup <geo...@cbcast.com> wrote:
>>
>> And you need v2c for 64-bit interface counters. On an airFiber though, does 
>> it really matter? Doesn't bother me, I monitor the router/switch port for 
>> traffic anyway.
>>
>> On 10/27/2016 12:26 PM, Paul Stewart wrote:
>>> I’m involved with a project to provide better visibility into our UBNT 
>>> deployments and just realized that, so far, their equipment only supports 
>>> SNMP v1?  Is this right?
>>>
>>> Example is a AirFiber 24Ghz link that I’m testing against right now
>>>
>>> If correct …. ummm… wow!
>>>
>>> Thanks,
>>> Paul
>>>

Reply via email to