FSK is going to be hard to colo due to the fact you mentioned but you
should be able to upgrade to fsk latest FW and
get what u need for ATPC
Also, Look at you epmp for latest FW for it to also have some more
control over ATPC
You also may need to adj the level at which the ATPC will adjust to.
Being that close I would set it lower from -57 to more like -67 or so
and do the same for both fsk and epmp.
On 01/03/2017 02:44 PM, George Skorup wrote:
First time I've tried this. I have a site with two 5750APs. They are
quite obviously overloading the receiver on the ePMP GPS AP. Put
numbers in the co-lo spreadsheet, timing checks out. Running the ePMP
in the 5.4 band. Still works for shit.
This is a very compact micro-pop, so we have SMs within 50-100 feet of
the tower. I'm betting the SM uplinks are interfering with the ePMP
AP. And I get no SM Tx power control on the Canopy's because the APs
are P9's. Probably gonna have to go to an ePMP 2000 AP. Ugh. I would
put 450 there, but the boss said no, the SMs are too expensive.
--
