I don't think so... 486Mbps would be right in line with what other licensed links do at 1024QAM... I think there's something else going on.
On Wed, Feb 15, 2017 at 9:52 AM, Ken Hohhof <[email protected]> wrote: > It sounds like you are adding xmt and rcv throughput. That is not > normally done with licensed links. If you say 750 Mbps, people will assume > 750M xmt + 750M rcv simultaneously, or 1.5G aggregate. > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Jeremy > *Sent:* Wednesday, February 15, 2017 9:42 AM > *To:* [email protected] > *Subject:* Re: [AFMUG] 18GHz licensed > > > > At 1024QAM it does 761Mbps LG packets and 486Mbps SM packets. When I ran > TCP speed tests on the link I got 750Mbps though. > > > > On Wed, Feb 15, 2017 at 8:40 AM, Jeremy <[email protected]> wrote: > > No, it is 1024. > > > > On Wed, Feb 15, 2017 at 8:25 AM, Josh Luthman <[email protected]> > wrote: > > Is that 2048, Jeremy? > > > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > > > On Wed, Feb 15, 2017 at 10:18 AM, Jeremy <[email protected]> wrote: > > Our 6GHz Trango link does 750Mbps FDX on a 60MHz channel width. > > > > On Wed, Feb 15, 2017 at 7:55 AM, Rory Conaway <[email protected]> > wrote: > > No but it’s the middle of Phoenix, I’d be surprised if it was. > > > > Rory > > > > *From:* Af [mailto:[email protected]] *On Behalf Of *Jeff Broadwick - > Lists > *Sent:* Wednesday, February 15, 2017 5:06 AM > > > *To:* [email protected] > *Subject:* Re: [AFMUG] 18GHz licensed > > > > Did you check and see if there is a 60MHz channel available in 6GHz Rory? > > Jeff Broadwick > > ConVergence Technologies, Inc. > > 312-205-2519 <(312)%20205-2519> Office > > 574-220-7826 <(574)%20220-7826> Cell > > [email protected] > > > On Feb 15, 2017, at 1:39 AM, Rory Conaway <[email protected]> wrote: > > Will the Cambium 820 support that? > > Rory > > -----Original Message----- > From: Af [mailto:[email protected] <[email protected]>] On Behalf > Of George Skorup > Sent: Tuesday, February 14, 2017 11:25 PM > To: [email protected] > Subject: Re: [AFMUG] 18GHz licensed > > IIRC, there are 10 channel pairs on the 40MHz channel plan for 18GHz. > You could always do 2+0 if there are two channels available on your > proposed path. > > On 2/15/2017 12:06 AM, Rory Conaway wrote: > > 12 miles. Needs 4' dishes minimum but I didn't ask about both > polarities. Thanks. > > > > Rory > > > > -----Original Message----- > > From: Af [mailto:[email protected] <[email protected]>] On Behalf > Of Trey Scarborough > > Sent: Tuesday, February 14, 2017 10:05 PM > > To: [email protected] > > Subject: Re: [AFMUG] 18GHz licensed > > > > Hmm Xpic if you can get 40mhz on H and V. are you trying to make this > > go > > 30 miles though... > > > > > > On 2/14/2017 10:17 PM, Rory Conaway wrote: > > I have a link where only 40MHz is available. What would my best > > option be to get more than 500Mbps out of it? 2048QAM is limited to > 347Mbps. > > > > > > > > *Rory Conaway **� Triad Wireless �**CEO* > > > > *4226 S. 37^th Street � Phoenix � AZ 85040* > > > > *602-426-0542 <(602)%20426-0542>* > > > > *[email protected] <mailto:[email protected] > <[email protected]>>* > > > > *www.triadwireless.net <http://www.triadwireless.net/>* > > > > * * > > > > �The successful man is the one who finds out what is the matter > > with his business before his competitors do.� - Roy L. Smith > > > > > > > > > > > > > > > > > > >
