Hey Cambium, move the factories to PR!

From: Af <af-boun...@afmug.com<mailto:af-boun...@afmug.com>> on behalf of Ken 
Hohhof <af...@kwisp.com<mailto:af...@kwisp.com>>
Reply-To: "af@afmug.com<mailto:af@afmug.com>" 
<af@afmug.com<mailto:af@afmug.com>>
Date: Friday, February 17, 2017 at 6:07 PM
To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>>
Subject: Re: [AFMUG] CMM5 controller.. Are you serious, Cambium?

They need to cover the 35% tax for building it in Mexico.

From: Af [mailto:af-boun...@afmug.com] On Behalf Of Keefe John
Sent: Friday, February 17, 2017 4:03 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] CMM5 controller.. Are you serious, Cambium?


So they're charging $995.00 for something that likely cost them < $50.  Now you 
know their profit margins on radios and other hardware.

Keefe




Gino Villarini


President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968

[cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

On 2/17/2017 3:28 PM, Vlad Sedov wrote:
Awesome! Can't wait. We have a bunch of these Medusas going up in the near 
future..


Vlad


On 2/17/2017 3:17 PM, Forrest Christian (List Account) wrote:
So this looks like as good of a place as any to provide this tidbit:
I finally found the component I was looking for to complete the cambium sync 
design here, and I now have a breadboarded solution to sync Medusa (and 450i) 
via 'cambium sync) here.   Seems to be working.   I'm in the process of getting 
the design on a prototype board for the rackmount injector.     This *is* going 
to be more expensive than the non-cambium sync version, but for roughly the 
price of just that controller,  you should be able to get the rackmount 
chassis+controller plus either 8 of injection, and a syncbox GPS receiver.   
For probably around $1200 or so, you should be able to get a fully loaded one 
with 16 ports of sync.
I'm *not* holding this injector for this for reasons I described in earlier 
threads, but add a month or two after WISPAMERICA and this should be shipping.
-forrest


On Fri, Feb 17, 2017 at 10:13 AM, Vlad Sedov 
<v...@atlasok.com<mailto:v...@atlasok.com>> wrote:
The only reason we got this is to properly sync our Medusa APs from the base of 
the tower, and maintain a clean gigabit ethernet link.
If Forrest had a product that did the same thing, we would be all over it. 
Literally every other piece of GPS sync hardware we use is from PacketFlux.


Vlad


On 2/17/2017 11:09 AM, Mathew Howard wrote:
You could also buy all the parts to do the same thing with PacketFlux gear for 
a whole lot less than $800... I don't think the actual cost of building the 
hardware has much to do with the price of a CMM

On Fri, Feb 17, 2017 at 10:55 AM, Adam Moffett 
<dmmoff...@gmail.com<mailto:dmmoff...@gmail.com>> wrote:
You couldn't write the software for it for $100.

Are you looking at a prototype or a finished product? Link?



------ Original Message ------
From: "Vlad Sedov" <v...@atlasok.com<mailto:v...@atlasok.com>>
To: af@afmug.com<mailto:af@afmug.com>
Sent: 2/17/2017 11:53:31 AM
Subject: Re: [AFMUG] CMM5 controller.. Are you serious, Cambium?
No doubt, but for $800, I would expect something a bit more um.. rugged. I can 
build this for about $100.


Vlad

On 2/17/2017 10:36 AM, Adam Moffett wrote:
Just like you, they're in business to make money.


------ Original Message ------
From: "Vlad Sedov" <v...@atlasok.com<mailto:v...@atlasok.com>>
To: "af@afmug.com<mailto:af@afmug.com>" <af@afmug.com<mailto:af@afmug.com>>
Sent: 2/17/2017 10:31:01 AM
Subject: [AFMUG] CMM5 controller.. Are you serious, Cambium?
$700-900 for a $35 Raspberry Pi controller, a DC-DC regulator, and a metal box?
Looks like OpenWRT-type Linux distro with LuCI web interface, and a module to 
control the CMM5.

Seems a bit steep, no?


peace

Vlad









--
Forrest Christian CEO, PacketFlux Technologies, Inc.
Tel: 406-449-3345 | Address: 3577 Countryside Road, Helena, MT 59602
forre...@imach.com<mailto:forre...@imach.com> | 
http://www.packetflux.com<http://www.packetflux.com/>
[https://s3.amazonaws.com/images.wisestamp.com/icons/linkedin.png]<http://www.linkedin.com/in/fwchristian>
 [https://s3.amazonaws.com/images.wisestamp.com/icons/facebook.png] 
<http://facebook.com/packetflux>  
[https://s3.amazonaws.com/images.wisestamp.com/icons/twitter.png] 
<http://twitter.com/@packetflux>





Reply via email to