All you Cisco lovers will hate me but just get a unfi setup what you are doing would literally be like 5 clicks and done
On Fri, Apr 7, 2017, 12:38 PM Josh Luthman <j...@imaginenetworksllc.com> wrote: > VLAN is 1998 - wow! > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > Suite 1337 > Troy, OH 45373 > > On Fri, Apr 7, 2017 at 11:39 AM, Dave <dmilho...@wletc.com> wrote: > > Yes.. > I come from the 1990 era of Cisco LOL > > > > On 04/07/2017 10:29 AM, Cassidy B. Larson wrote: > > switchport trunk native vlan sounds like what you’re after? > It’ll pass an untagged vlan across a trunk port. > > > On Apr 7, 2017, at 9:26 AM, Dave <dmilho...@wletc.com> <dmilho...@wletc.com> > wrote: > > Ok, > So I want to manage my radio link and provide public access over that link. > How do I configure my Cisco for switchport trunk to allow the customer to > connect at the other end with a sonicwall for his public ip? > So the topology of this is > Vlan 1000 is a managed vlan > Vlan 2400 is the public access vlan > Cisco port is mode trunk dot1q to allow both vlans but since the customer > dont have a vlan to configure on his sonic wall I would need my radios to > allow > switchport access of 2400 > > Is there a way to tell the cisco to allow switchport access for vlan2400 on > the same trunked port? > > Any ideas will be helpful > > Thanks > Dave > > -- > <Vcard.jpg> > > > -- > > >
