do i drill a hole in the saf and push the fiber in the hole and the radio
mites will just make it work? :-)
[image: Inline image 1]


On Sun, Apr 23, 2017 at 11:57 PM, Josh Luthman <[email protected]>
wrote:

> Best solution would be to do fiber IMO.  SFP right into the RB.
>
>
> Josh Luthman
> Office: 937-552-2340 <(937)%20552-2340>
> Direct: 937-552-2343 <(937)%20552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Mon, Apr 24, 2017 at 12:32 AM, Steve Jones <[email protected]>
> wrote:
>
>> thanks man
>>
>> i would lock it down but i dont know whats causing it, im fearful it
>> would just dump the link all together, which is fine if im on the network,
>> but if im off network (as i found out the hard way tonite) my remote access
>> to the shop drops and all the site routers ACLs limit access to the office
>> IP. I had to VPN into a contact services customer who is on our network and
>> then connect to our office so i could flip the port back on, this, btw is
>> also why i hate having to have static routes on our OSPF network,
>>
>> On Sun, Apr 23, 2017 at 11:08 PM, Adam Moffett <[email protected]>
>> wrote:
>>
>>> I'm 100% sure a script could do that.
>>>
>>> :global interfacestats
>>> :global int "ether2"
>>> :set interfacestats value=[/interface ethernet monitor [find name=$int]
>>> as-value]
>>> :if (($interfacestats->"rate")!="1000Mbps") do={/interface ethernet
>>> disable [find name=$int]; :delay 3; /interface ethernet enable [find
>>> name=$int]}
>>>
>>> That took me a strangely long time to figure out how to do because
>>> Mikrotik scripts are friggin weird.   But there it is.  You could schedule
>>> that every xx minutes if you wanted.
>>> :delay 3; might not be necessary.  I'm not sure.
>>>
>>> On the other hand, what if you just disallow all auto-negotiation
>>> options except for 1000/F ?
>>>
>>>
>>> ------ Original Message ------
>>> From: "Steve Jones" <[email protected]>
>>> To: "[email protected]" <[email protected]>
>>> Sent: 4/23/2017 10:59:17 PM
>>> Subject: [AFMUG] mikrotik port monitor script
>>>
>>> we have a saf 11ghz primary link interconnecting our two upstream
>>> locations, about once every 6 or 7 months the mikrotik renegotiates to
>>> 100mbps. disable/enable the port fixes it.
>>>
>>> Ive never been able to reproduce it because it only happens once or
>>> twice a year.
>>>
>>> Is there a script i can run on the mikrotik that monitors that specific
>>> port and flaps it if it is ever not running 1gbps?
>>>
>>>
>>
>

Reply via email to