You definitely could get the Luminas with only copper... I'm not sure if
that's still the case or not.

On Mon, Apr 24, 2017 at 10:54 AM, Josh Luthman <[email protected]>
wrote:

> I thought it was Fiber or Fiber + Copper?  Can't remember for sure...
>
>
> Josh Luthman
> Office: 937-552-2340 <(937)%20552-2340>
> Direct: 937-552-2343 <(937)%20552-2343>
> 1100 Wayne St
> Suite 1337
> Troy, OH 45373
>
> On Mon, Apr 24, 2017 at 11:13 AM, Mathew Howard <[email protected]>
> wrote:
>
>> Only if you ordered the SAF with a fiber port... I'm not sure if there's
>> any way they can be added if you got it with copper only. I made that
>> mistake on ours... but it was a long time ago, when I didn't know any
>> better (it also doesn't even cause any issue, so I don't really care, but
>> still... ).
>>
>> On Mon, Apr 24, 2017 at 9:50 AM, Josh Luthman <
>> [email protected]> wrote:
>>
>>> Should have a "fiber port" with their badass connector on it.  Or an SFP.
>>>
>>>
>>> Josh Luthman
>>> Office: 937-552-2340 <(937)%20552-2340>
>>> Direct: 937-552-2343 <(937)%20552-2343>
>>> 1100 Wayne St
>>> Suite 1337
>>> Troy, OH 45373
>>>
>>> On Mon, Apr 24, 2017 at 1:05 AM, Steve Jones <[email protected]>
>>> wrote:
>>>
>>>> do i drill a hole in the saf and push the fiber in the hole and the
>>>> radio mites will just make it work? :-)
>>>> [image: Inline image 1]
>>>>
>>>>
>>>> On Sun, Apr 23, 2017 at 11:57 PM, Josh Luthman <
>>>> [email protected]> wrote:
>>>>
>>>>> Best solution would be to do fiber IMO.  SFP right into the RB.
>>>>>
>>>>>
>>>>> Josh Luthman
>>>>> Office: 937-552-2340 <(937)%20552-2340>
>>>>> Direct: 937-552-2343 <(937)%20552-2343>
>>>>> 1100 Wayne St
>>>>> Suite 1337
>>>>> Troy, OH 45373
>>>>>
>>>>> On Mon, Apr 24, 2017 at 12:32 AM, Steve Jones <
>>>>> [email protected]> wrote:
>>>>>
>>>>>> thanks man
>>>>>>
>>>>>> i would lock it down but i dont know whats causing it, im fearful it
>>>>>> would just dump the link all together, which is fine if im on the 
>>>>>> network,
>>>>>> but if im off network (as i found out the hard way tonite) my remote 
>>>>>> access
>>>>>> to the shop drops and all the site routers ACLs limit access to the 
>>>>>> office
>>>>>> IP. I had to VPN into a contact services customer who is on our network 
>>>>>> and
>>>>>> then connect to our office so i could flip the port back on, this, btw is
>>>>>> also why i hate having to have static routes on our OSPF network,
>>>>>>
>>>>>> On Sun, Apr 23, 2017 at 11:08 PM, Adam Moffett <[email protected]>
>>>>>> wrote:
>>>>>>
>>>>>>> I'm 100% sure a script could do that.
>>>>>>>
>>>>>>> :global interfacestats
>>>>>>> :global int "ether2"
>>>>>>> :set interfacestats value=[/interface ethernet monitor [find
>>>>>>> name=$int] as-value]
>>>>>>> :if (($interfacestats->"rate")!="1000Mbps") do={/interface ethernet
>>>>>>> disable [find name=$int]; :delay 3; /interface ethernet enable [find
>>>>>>> name=$int]}
>>>>>>>
>>>>>>> That took me a strangely long time to figure out how to do because
>>>>>>> Mikrotik scripts are friggin weird.   But there it is.  You could 
>>>>>>> schedule
>>>>>>> that every xx minutes if you wanted.
>>>>>>> :delay 3; might not be necessary.  I'm not sure.
>>>>>>>
>>>>>>> On the other hand, what if you just disallow all auto-negotiation
>>>>>>> options except for 1000/F ?
>>>>>>>
>>>>>>>
>>>>>>> ------ Original Message ------
>>>>>>> From: "Steve Jones" <[email protected]>
>>>>>>> To: "[email protected]" <[email protected]>
>>>>>>> Sent: 4/23/2017 10:59:17 PM
>>>>>>> Subject: [AFMUG] mikrotik port monitor script
>>>>>>>
>>>>>>> we have a saf 11ghz primary link interconnecting our two upstream
>>>>>>> locations, about once every 6 or 7 months the mikrotik renegotiates to
>>>>>>> 100mbps. disable/enable the port fixes it.
>>>>>>>
>>>>>>> Ive never been able to reproduce it because it only happens once or
>>>>>>> twice a year.
>>>>>>>
>>>>>>> Is there a script i can run on the mikrotik that monitors that
>>>>>>> specific port and flaps it if it is ever not running 1gbps?
>>>>>>>
>>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>

Reply via email to