Should have a "fiber port" with their badass connector on it. Or an SFP.
Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Mon, Apr 24, 2017 at 1:05 AM, Steve Jones <[email protected]> wrote: > do i drill a hole in the saf and push the fiber in the hole and the radio > mites will just make it work? :-) > [image: Inline image 1] > > > On Sun, Apr 23, 2017 at 11:57 PM, Josh Luthman < > [email protected]> wrote: > >> Best solution would be to do fiber IMO. SFP right into the RB. >> >> >> Josh Luthman >> Office: 937-552-2340 <(937)%20552-2340> >> Direct: 937-552-2343 <(937)%20552-2343> >> 1100 Wayne St >> Suite 1337 >> Troy, OH 45373 >> >> On Mon, Apr 24, 2017 at 12:32 AM, Steve Jones <[email protected]> >> wrote: >> >>> thanks man >>> >>> i would lock it down but i dont know whats causing it, im fearful it >>> would just dump the link all together, which is fine if im on the network, >>> but if im off network (as i found out the hard way tonite) my remote access >>> to the shop drops and all the site routers ACLs limit access to the office >>> IP. I had to VPN into a contact services customer who is on our network and >>> then connect to our office so i could flip the port back on, this, btw is >>> also why i hate having to have static routes on our OSPF network, >>> >>> On Sun, Apr 23, 2017 at 11:08 PM, Adam Moffett <[email protected]> >>> wrote: >>> >>>> I'm 100% sure a script could do that. >>>> >>>> :global interfacestats >>>> :global int "ether2" >>>> :set interfacestats value=[/interface ethernet monitor [find name=$int] >>>> as-value] >>>> :if (($interfacestats->"rate")!="1000Mbps") do={/interface ethernet >>>> disable [find name=$int]; :delay 3; /interface ethernet enable [find >>>> name=$int]} >>>> >>>> That took me a strangely long time to figure out how to do because >>>> Mikrotik scripts are friggin weird. But there it is. You could schedule >>>> that every xx minutes if you wanted. >>>> :delay 3; might not be necessary. I'm not sure. >>>> >>>> On the other hand, what if you just disallow all auto-negotiation >>>> options except for 1000/F ? >>>> >>>> >>>> ------ Original Message ------ >>>> From: "Steve Jones" <[email protected]> >>>> To: "[email protected]" <[email protected]> >>>> Sent: 4/23/2017 10:59:17 PM >>>> Subject: [AFMUG] mikrotik port monitor script >>>> >>>> we have a saf 11ghz primary link interconnecting our two upstream >>>> locations, about once every 6 or 7 months the mikrotik renegotiates to >>>> 100mbps. disable/enable the port fixes it. >>>> >>>> Ive never been able to reproduce it because it only happens once or >>>> twice a year. >>>> >>>> Is there a script i can run on the mikrotik that monitors that specific >>>> port and flaps it if it is ever not running 1gbps? >>>> >>>> >>> >> >
