Was looking at this: https://www.amazon.com/gp/product/B019WI5XXO/
And maybe one of these: https://www.amazon.com/gp/product/B00PZ026OS/ Feasible? On Tue, Apr 25, 2017 at 9:16 AM, Nate Burke <n...@blastcomm.com> wrote: > We use this > http://www.rowewireless.com/tp-dcdc-usb-24-usb-24v-poe-inserter-24vdc-6w-poe > with like a 12,000mah USB Battery pack. It will run FSK, 450 and EPMP > Radios (when they are not cold). > > Use the bare unit for UNBT radios, > add this https://www.monoprice.com/product?p_id=5088 to power Cambium radios > (that are not auto POE Sensing). > > On 4/25/2017 9:10 AM, Mathew Howard wrote: > > If I remember correctly, an airgateway installer won't power a Canopy SM... > it's either not enough current or voltage (I forget which, maybe both). > > It's been awhile since I tried to make it work, but from what I can > remember, it's going to be pretty tough to get a Canopy SM to run off USB, > because it's going to be tough to find a USB power source that will put out > over 2amps (which is only 10 watts), and if I'm remembering right, a Canopy > SM needs 12 watts.... but I would've been using a 900mhz SM, and the others > may very well be different. All I can remember for sure was that I couldn't > make it work reliably. > > On Tue, Apr 25, 2017 at 8:53 AM, Jay Weekley <par...@cyberbroadband.net> > wrote: >> >> The Airgateway Installer with a POE crossover cable would work with enough >> power coming through whatever you're using to power it. >> >> Matt wrote: >>> >>> Does anyone know of a device that takes USB power source and converts >>> it too 24v POE output for Canopy SM? >>> >>> --- >>> This email has been checked for viruses by AVG. >>> http://www.avg.com >>> >>> >> > >