Your second paragraph, that would be awesome. Joe
> On May 3, 2017, at 1:39 PM, George Skorup <george.sko...@cbcast.com> wrote: > > Yes, that's frustrating. ePMP only supports 2.5ms @ 20MHz for timing with > FSK. It's obvious that they don't want to hurt 450 sales, especially now with > the ePMP 2k closing the performance gap. I don't want ePMP-450 sync to > co-locate them. I want it to be able to sync nearby ePMP APs at micro-POPs, > where I typically run a 10MHz, with larger sites that have 450 clusters. > We're already running into this. > > I've often wondered if they could make their new 5GHz wideband SoC-based SMs > speak ePMP TDD in addition to the regular 450 OFDM. Imagine being able to > upgrade a site from ePMP to 450i or 450m and never have to touch the SMs. I > often dream of parallel universes where these things are possible. And then I > wake up. :( > > On 5/3/2017 8:27 AM, Kurt Fankhauser wrote: >> I can't use EPMP for microsites because it won't sync with my 450 network. >> Plus I don't want a mixed and matched network. The 450 interface is better, >> has a lot of features I am using such as AP downlink utilization %. Epmp >> just isn't for me. >> >> On Tue, May 2, 2017 at 9:13 PM, David Milholen <dmilho...@wletc.com >> <mailto:dmilho...@wletc.com>> wrote: >> Why not just go EPMP for the light or small cell startup? Thats what >> application I would use it for. I know that it only comes in 2 flavors of >> band but thats where planning and design comes in. >> Everything Else deserves scale ability and high capacity for denser and >> larger area of coverage. (450i/M) >> >> Price point is great on the EPMP line also. Lovin the E500/E400 series for >> high capacity indoor solutions. The E500 make a great >> outdoor market coverage AP. For example we deploy these at out Farmers >> Market and I only used one AP and a 450 sub to bring the 40Mb connection to >> it. >> >> The vendors use it for their Square and simple wifi offload. We have 2 at >> the Arena at our local Fairgrounds and the vendors for the Rodeo absolutely >> loved it and asked how >> >> they get such great service at their house LOL. The coolest part is that >> the APs are at opposite ends of the arena and use mesh to connect. They are >> positioned so they look under the bleachers >> where the vendors are. We kill 2 birds with one stone because folks in the >> bleachers can connect with limited guest access. Which we got about 25 new >> customers off that one event.. >> >> LOVE IT >> >> >> On 5/2/2017 4:59 PM, Kurt Fankhauser wrote: >>> I second that! with no 450L right now this is a huge problem on justifying >>> smaller sites... >>> >>> On Tue, May 2, 2017 at 2:36 PM, George Skorup <george.sko...@cbcast.com >>> <mailto:george.sko...@cbcast.com>> wrote: >>> Dear Matt, we need a 450i Lite AP. >>> >>> On 5/2/2017 10:04 AM, Matt Mangriotis wrote: >>>> Regarding the timing port, it’s just a wiring change to the RJ-45 >>>> connector. >>>> >>>> >>>> You can see this explained here: >>>> http://community.cambiumnetworks.com/t5/PMP-FAQ/Cable-Diagram-for-450i-and-450m-to-UGPS/m-p/52198#U52198 >>>> >>>> <http://community.cambiumnetworks.com/t5/PMP-FAQ/Cable-Diagram-for-450i-and-450m-to-UGPS/m-p/52198#U52198> >>>> >>>> Matt >>>> >>>> <> >>>> From: Af [mailto:af-boun...@afmug.com <mailto:af-boun...@afmug.com>] On >>>> Behalf Of Mathew Howard >>>> Sent: Tuesday, May 2, 2017 9:45 AM >>>> To: af <af@afmug.com> <mailto:af@afmug.com> >>>> Subject: Re: [AFMUG] 450 AP discontinued? >>>> >>>> >>>> Yeah, 48v instead of 24v... 450i still uses the normal sync over power >>>> (it's the 450m that changed that), but they did replace the old timing >>>> port with the rj45 aux port, so I'm not sure what needs to be done to make >>>> timing port stuff work. >>>> >>>> >>>> On Tue, May 2, 2017 at 9:40 AM, Steve Jones <thatoneguyst...@gmail.com >>>> <mailto:thatoneguyst...@gmail.com>> wrote: >>>> >>>> the i series has a different power plant and sync mechanism doesnt it? >>>> >>>> >>>> On Tue, May 2, 2017 at 9:01 AM, <ch...@wbmfg.com <mailto:ch...@wbmfg.com>> >>>> wrote: >>>> >>>> I wonder when this will happen. Like to schedule the 450 stinger to be >>>> discontinued at the same time. >>>> >>>> >>>> From: David Milholen >>>> >>>> Sent: Tuesday, May 2, 2017 6:16 AM >>>> >>>> To: af@afmug.com <mailto:af@afmug.com> >>>> Subject: Re: [AFMUG] 450 AP discontinued? >>>> >>>> >>>> replace your 450s with 450i or m.. 450i Is approx same price point as 450 >>>> in AP world >>>> >>>> >>>> >>>> On 5/1/2017 12:01 PM, George Skorup wrote: >>>> >>>> FYI, I heard today that the regular 450 APs are no longer available, at >>>> least in 5GHz. So be prepared. We lost some 450 and 450i APs over the nice >>>> stormy weekend. I hate my life. >>>> >>>> >>>> -- >>>> <Mail Attachment.jpeg> >>>> >>>> >>>> >>> >>> >> >> -- >> <Mail Attachment.jpeg> >> >
