It's a 3' dish and six sector antennas.
------ Original Message ------
From: "Lewis Bergman" <lewis.berg...@gmail.com>
To: af@afmug.com
Sent: 6/6/2017 3:53:33 PM
Subject: Re: [AFMUG] what is the typical wind load of an 80' telephone
pole?
Kind of looks like a 30 inch but you are likely right. That is pretty
loaded.
On Tue, Jun 6, 2017, 2:31 PM George Skorup <george.sko...@cbcast.com>
wrote:
Not sure why this went direct to Adam and not the list. Probably me
being stupid clicking on the wrong button in Thunderchicken.
On 6/6/2017 2:25 PM, George Skorup wrote:
Holy shit. Is that a 4' dish?
On 6/6/2017 6:12 AM, Adam Moffett wrote:
I don't think there's going to be a simple answer to that.
You'll need to know what class of pole it is. I've seen a chart
showing the horizontal force that can be applied to a pole based on
what class it is, and you could use that to make an estimate. I
think the class is based on the circumference at the tip. The chart
assumed the pole was a Douglas Fir, and it gave a range of values
because not every tree is the same. Then you have to wonder how
relevant any of that is if the pole develops a crack or starts
rotting.
How about at least this much:
------ Original Message ------
From: "Rory Conaway" <r...@triadwireless.net>
To: "af@afmug.com" <mailto:af@afmug.com> <af@afmug.com>
Sent: 6/5/2017 11:19:13 PM
Subject: Re: [AFMUG] what is the typical wind load of an 80'
telephone pole?
This pole is actually 80’ above ground. I misstated my question.
I meant what is the wind load capacity of the pole to determine how
many antennas I can put on it.
Rory
From: Af [mailto:af-boun...@afmug.com] On Behalf Of Christopher
Gray
Sent: Monday, June 5, 2017 4:24 PM
To:af@afmug.com
Subject: Re: [AFMUG] what is the typical wind load of an 80'
telephone pole?
What is the height of an installed 80' pole?
On Mon, Jun 5, 2017 at 7:10 PM, <dmmoff...@gmail.com> wrote:
I'm impressed you can 80' wooden pole in for $5500. Here it was
closer to $10,000. Just the pole itself was a few $k. Transport
from the yard to a worksite was $2500. It's over the length limit
for NYS roads, so we have to have escort vehicles and file a plan
with the DOT. Some pole contractors didn't even want to do it.
Sent from my iPhone
On Jun 5, 2017, at 6:35 PM, Eric Muehleisen <ericm...@gmail.com>
wrote:
Funny you mention this. I just got off the phone with the power
company about the exact same thing. Around here anything higher
than 65 ft is considered transmission line pole and gets
expensive.
$5,500 for 80 ft.
$2,500 for 65 ft.
$1,000 for 40 ft.
that cost includes the pole and labor to plant it.
Also, you can't set a meter on the pole unless they retain
ownership or you lease the pole as part of the service. The cost
to run lines and/or transformers is on you as well. So plant your
pole close to the existing grid.
On Mon, Jun 5, 2017 at 5:06 PM, Rory Conaway
<r...@triadwireless.net> wrote:
Rory Conaway • Triad Wireless • CEO
4226 S. 37th Street • Phoenix • AZ 85040
602-426-0542 <tel:%28602%29%20426-0542>
r...@triadwireless.net
www.triadwireless.net
“"Engineers believe that if it ain't broke, it doesn't have
enough features yet." — Scott Adams
