Here is what I would suggest. 1) Use the Mimosa Brick, for testing, and see if that fixes your issue if it does then consider, using a different port or 48VH power etc to see if the issue is on then netonix side.
if you still have the same issue with Mimosa Brick then you know the problem is else ware. BWT.. if you lock both sides (Radio & Netonix) to 100meg full duplex or even 1G half duplex do they hold the connection ? Regards. Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232 Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ----- Original Message ----- > From: "CBB - Jay Fuller" <par...@cyberbroadband.net> > To: af@afmug.com > Sent: Thursday, June 15, 2017 5:06:16 PM > Subject: Re: [AFMUG] Netonix/Mimosa compatibility. > Oh, and no surge protector at the moment. > > Faisal Imtiaz wrote: >> have not seen that issue ... >> >> Are you using 48VH port ? or just 48V ? >> and is there a surge protector in the middle ? >> >> Regards >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >> >> ----- Original Message ----- >>> From: "CBB - Jay Fuller" <par...@cyberbroadband.net> >>> To: af@afmug.com >>> Sent: Thursday, June 15, 2017 4:44:38 PM >>> Subject: [AFMUG] Netonix/Mimosa compatibility. >>> Has anyone experience a compatibility problem when using Mimosa radios >>> with Netonix for power? We've got a problem with gigabit link >>> negotiation issues where link will alternate between a gig and no link. >>> We've upgraded to Cat 6 and are still seeing the issue. >> --- >> This email has been checked for viruses by AVG. >> http://www.avg.com >>