hmm.. sounds like you have some other issue going on ... Faisal Imtiaz Snappy Internet & Telecom 7266 SW 48 Street Miami, FL 33155 Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net ----- Original Message ----- > From: "CBB - Jay Fuller" <par...@cyberbroadband.net> > To: af@afmug.com > Sent: Thursday, June 15, 2017 6:03:05 PM > Subject: Re: [AFMUG] Netonix/Mimosa compatibility. > We tried the Mimosa brick and it didn't help but that was prior to > trying Mimosa's suggestion of moving to Cat6 . We've tried locking it to > 100 meg full duplex and it held a connection but I am not sure if we > tried 1 gig half. > > Faisal Imtiaz wrote: >> Here is what I would suggest. >> >> 1) Use the Mimosa Brick, for testing, and see if that fixes your issue >> if it does then consider, using a different port or 48VH power etc to >> see if the >> issue is on then netonix side. >> >> if you still have the same issue with Mimosa Brick then you know the >> problem is >> else ware. >> >> BWT.. if you lock both sides (Radio & Netonix) to 100meg full duplex or >> even 1G >> half duplex do they hold the connection ? >> >> Regards. >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >> >> ----- Original Message ----- >>> From: "CBB - Jay Fuller" <par...@cyberbroadband.net> >>> To: af@afmug.com >>> Sent: Thursday, June 15, 2017 5:06:16 PM >>> Subject: Re: [AFMUG] Netonix/Mimosa compatibility. >>> Oh, and no surge protector at the moment. >>> >>> Faisal Imtiaz wrote: >>>> have not seen that issue ... >>>> >>>> Are you using 48VH port ? or just 48V ? >>>> and is there a surge protector in the middle ? >>>> >>>> Regards >>>> >>>> Faisal Imtiaz >>>> Snappy Internet & Telecom >>>> 7266 SW 48 Street >>>> Miami, FL 33155 >>>> Tel: 305 663 5518 x 232 >>>> >>>> Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net >>>> >>>> ----- Original Message ----- >>>>> From: "CBB - Jay Fuller" <par...@cyberbroadband.net> >>>>> To: af@afmug.com >>>>> Sent: Thursday, June 15, 2017 4:44:38 PM >>>>> Subject: [AFMUG] Netonix/Mimosa compatibility. >>>>> Has anyone experience a compatibility problem when using Mimosa radios >>>>> with Netonix for power? We've got a problem with gigabit link >>>>> negotiation issues where link will alternate between a gig and no link. >>>>> We've upgraded to Cat 6 and are still seeing the issue. >>>> --- >>>> This email has been checked for viruses by AVG. >>>> http://www.avg.com