>From the factory you can plug in anything 24v normal polarity to the ether2-5
Definitely Force200, Nano and Beam radios A force 110 (with the blue/brown swapped) will power up for a bit but there is some sort of hardware fault protection that can be fixed by a POWER cycle, not a software reboot =( Josh Luthman Office: 937-552-2340 <(937)%20552-2340> Direct: 937-552-2343 <(937)%20552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Fri, Jul 7, 2017 at 10:50 AM, Mathew Howard <mhoward...@gmail.com> wrote: > Yeah, ethernet1 only supports PoE in, and 2-5 only support PoE out. I've > always used forced-on... auto has always been kind of flakey for me on any > of the Mikrotiks with PoE out. > > On Thu, Jul 6, 2017 at 11:59 PM, Tim Reichhart < > timreichh...@hometowncable.net> wrote: > >> >> See ethernet1 doesn't have option for poe out only poe in so ports 2-5 >> have option for poe but it only works when you force it on. Because I tried >> with rocket m5 prism ac it would come on but no lan lights if you have 3 >> rockets plugged in. First rocket m5 lan light would come on then if I plug >> in the other 2 rockets I can only get gps lights to come on and no lan >> lights. So I'm little confused on this. >> >> >> >> -----Original Message----- >> Subject: Re: [AFMUG] Is POE out settings on new powerbox pro different? >> From: "Mathew Howard" <mhoward...@gmail.com> >> To: af <af@afmug.com> >> Date: 07/07/17 02:36:04am >> >> Don't you just turn it on? I'm not sure where it is in the CLI, but in >> Winbox it should be under the PoE settings on each port just like it always >> was. >> >> On Thu, Jul 6, 2017 at 6:29 PM, Tim Reichhart < >> timreichh...@hometowncable.net> wrote: >> >> Then how would I be turn 2-5 ports on for poe? There have be some kind >> of special setting to turn it on. >> >> -----Original Message----- >> Subject: Re: [AFMUG] Is POE out settings on new powerbox pro different? >> From: "Mathew Howard" <mhoward...@gmail.com> >> To: af <af@afmug.com> >> Date: 2017/07/06 22:58:16 >> >> >> It looks like they removed that setting. >> >> >> I haven't seen the PowerBox Pro yet, but I'm assuming it's got the same >> guts as the hEX PoE (the gigabit version). We've had quite a few of those >> running for awhile now, and so far I haven't had any need to enable the >> long cable mode, like on the old ones, so maybe they reworked the design >> enough that it just isn't necessary anymore. >> >> >> On Thu, Jul 6, 2017 at 3:03 PM, Tim Reichhart < >> timreichh...@hometowncable.net> wrote: >> Hello Guys, >> I have brand new powerbox poe and when I try to set with this command >> /interface ethernet poe settings set ether1-poe-in-long-cable=yes I get >> "bad command name settings (line 1 column 25) is there something they >> changed that you cant set this anymore in terminal? >> >> Tim >> >> >> >> >> >> >> >> >> >> >> >
