So... the jumper positions aren't printed on that board. I thought I
remembered seeing that on the first couple of the GigE version we
bought. I know they have it now though.
On 7/14/2017 6:17 PM, Steve Jones wrote:
No dice with this jumper either on 320. I'm going to start lighting
fires here in a minute
On Fri, Jul 14, 2017 at 6:02 PM, Steve Jones
<thatoneguyst...@gmail.com <mailto:thatoneguyst...@gmail.com>> wrote:
Pwr 1 48
Pwr 2 24
1 320
2 320
3 ubnt
4 fsk
Is this correct? The fsk won't power. But I think I have a
syncpipe parasitic up there
On Jul 14, 2017 5:21 PM, "George Skorup" <george.sko...@cbcast.com
<mailto:george.sko...@cbcast.com>> wrote:
It's printed on the board towards the left. Both the 10/100
and GigE versions have four jumpers per port. 10/100 jumpers
are pins 4, 5, 7 & 8 individually for the case of split-pair
power like the 320 and 430. The GigE version is pairs
(1&2/3&6/4&5/7&8) and will most definitely not do split-pair
power without re-wiring the RJ45 at one end so that two wrongs
make a right.
Yes, I was about 1/2 a second away from screwing up once. Set
the jumpers, put everything back together. Port 1 was set for
4-pair power and the 48VDC bus. A 450i AP was going there.
Everything got upside down and I almost plugged a regular
450AP into port #1 until I realized my mistake before it was
too late.
On 7/14/2017 4:49 PM, Steve Jones wrote:
packetflux poerinjector plus sync pinout for the jumpers. I
have the document of PoE Injector Diagrams, but it doesn't
seem right because by default these power cambium, but that
not the jumper config. Pretty sure its the wrong document,
and with mixing 24 and 48 with three different radio systems
id prefer it be correct
On Fri, Jul 14, 2017 at 4:44 PM, Colin Stanners
<cstann...@gmail.com <mailto:cstann...@gmail.com>> wrote:
Here's my version 0.7 from 2012, I need to update it.
On Fri, Jul 14, 2017 at 4:40 PM, Steve Jones
<thatoneguyst...@gmail.com
<mailto:thatoneguyst...@gmail.com>> wrote:
Anybody have a current one, I don't think mine us,
I'm using both inputs for 3 different kinds of radios
and I am not even sure on which way to orient the
board for the pins. I have 2 320s, a fsk 900, and a
ubnt 24v radio