This is great info. We too have experienced this same issue with AF24's. Like Gino, we always set it to Low Sensitivity. This setting allows us to easily run the site off portable generator in a pinch. High Sensitivity won't allow for a portable genset.
On Fri, Jul 28, 2017 at 4:24 AM, Gino A. Villarini <g...@aeronetpr.com> wrote: > Wow, might try this… we usually put them on low sensitivity for a more > robust experience. Didn’t know this affected the switching time! > > Thanks Collin!!! > > From: Af <af-boun...@afmug.com> on behalf of Colin Stanners < > cstann...@gmail.com> > Reply-To: "af@afmug.com" <af@afmug.com> > Date: Thursday, July 27, 2017 at 9:51 PM > To: "af@afmug.com" <af@afmug.com> > Subject: Re: [AFMUG] Is there such a thing as a AC Capacitor? > > Gino, can you say which gear? Most UPSes switch pretty much "instantly" > (less than one AC cycle, which lasts 16ms) so a PSU that wouldn't last one > AC cycle must have very questionable engineering. Or assuming that you use > APC UPSes, you can change the sensitivity setting to switch quicker: > http://www.apc.com/us/en/faqs/FA156514/ > > > > *Gino A. Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > On Thu, Jul 27, 2017 at 2:57 PM, Gino A. Villarini <g...@aeronetpr.com> > wrote: > >> Got some gear that hangs when UPS switches from AC power to Batts… needs >> something to power AC for microseconds >> >> >> >> *Gino A. Villarini* >> President >> Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 >> >> >
