I saw your PCN come through a couple weeks ago. I thought about
objecting just for fun. :) Nah, but I just glanced at it and didn't pay
much attention. I seem to recall they coordinated your links as hi and
lo and not both frequencies at both ends, probably because of your own
stuff or other paths nearby. That's what I've been saying all along.
Trying to coordinate a channel pair in both directions is just retarded.
On 8/17/2017 11:02 AM, Steve Jones wrote:
so for one site there is 11245 77M0D7D (A) and 10755 77M0D7D (A)
I can assume this is 2x80?
On Thu, Aug 17, 2017 at 10:57 AM, Brandon Shiers
<brandon.shi...@cerento.com <mailto:brandon.shi...@cerento.com>> wrote:
The emission designator will have the channel size in it. For
example a designator of 40M0W7D is a 40 MHz channel.
*Brandon Shiers, RF Engineer In Training*
937 West Main Street
Riverton, WY 82501
307.857.6704 <tel:%28307%29%20857-6704> (o)
307.840.2366 <tel:%28307%29%20840-2366> (c)
307.856.1499 <tel:%28307%29%20856-1499> (f)
brandon.shi...@cerento.com <mailto:brandon.shi...@cerento.com>
http://www.cerento.com/emailsignatures/logo.jpg
*From:* Af [mailto:af-boun...@afmug.com
<mailto:af-boun...@afmug.com>] *On Behalf Of *Steve Jones
*Sent:* Thursday, August 17, 2017 9:53 AM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* [AFMUG] Figuring out what our FCC application says
So we have completed the PCN on a couple mimosa B11 links (so
very, very unimpressed with these radios interface and function)
We went through comsearch. Trying to configure this, Im not sure
what channel settings to put in. I went to the application, I see
the centers, but no size. Is there a code on here that tells me
what channel size we are applying for?
And I notice the Application says the radio does not have ATPC, I
thought these did, maybe im wrong
