Mesh vendors aside,

Peplink used to make a device specifically for this application you run on a 
mobile device.  It has dual radios, one to connect, one to look ahead and 
connect to the next AP, no drop off off connection.  Unfortunately, they are 
discontinued.

What you can do though, is use a Peplink router with 2-3 WAN connections, put 
up 3 wireless omni antennas on the boat, each one assigned to a different SSID 
on shore.  Use a Peplink on shore and create a VPN tunnel across all 3 links.  
The Peplink will automatically load-balance each of the 3 connections as they 
drop on/off.

Not a cheap solution but it works.  If 30Mbps is sufficient, the routers start 
at around $400, you would need 2.

Rory



From: Af [mailto:[email protected]] On Behalf Of Adam Moffett
Sent: Saturday, September 9, 2017 7:53 AM
To: [email protected]
Subject: Re: [AFMUG] Link to Large Boat

I don't think any of the WISP priced Wimax or LTE stuff has decent roaming 
capability.  At least not the ones I have worked with.

Technically a mobile device on an NN license is supposed to be limited to +2db 
Tx power.  I doubt any enforcement happens with NN, but I'm just throwing it 
out there.



------ Original Message ------
From: "Lewis Bergman" <[email protected]<mailto:[email protected]>>
To: [email protected]<mailto:[email protected]>
Sent: 9/7/2017 11:50:45 AM
Subject: Re: [AFMUG] Link to Large Boat

Putting aside the sub question and RF for the moment, I would suggest creating 
a separate subnet shared across all three routers joined by EOIP for just this 
specific case. If the 3 routers share an upstream this might be the best place 
for the gateway for the subnet. This *should* let you roam across them at least 
without completely losing the stream. There is still rereg time. Of course, 
mobile protocols have this sort of thing built in so WiMAX, as much as I 
dislike it, and LTE both make allowances for this to different degrees. You 
will have to hope the rereg time doesn't exceed the buffer.

The SM's flipping back and forth would be a big killer I would think. Boat hits 
waves, starts to rock, SM's start to flip back an forth between AP's. Sounds 
like something I want my competition to support instead of me. That is of 
course, unless there is just to much money at stake to resist.


On Thu, Sep 7, 2017 at 10:08 AM Craig House 
<[email protected]<mailto:[email protected]>> wrote:
Stupid voice to text it should've said turn the Omni upside down. ??

Sent from my iPhone

> On Sep 7, 2017, at 10:08, Craig House 
> <[email protected]<mailto:[email protected]>> wrote:
>
> Turning on the upside down. ??
>
> Sent from my iPhone
>
> > On Sep 7, 2017, at 09:58, Dave 
> > <[email protected]<mailto:[email protected]>> wrote:
> >
> > Ok, either I am getting to old for these crazy challenges or I am 
> > subjecting my self to motivation I have not figured this one out yet LOL
> >
> > We have a large site seeing Boat that sits on one of our lakes which 
> > navigates north and south of the lake and some to the east.
> > We have 3 towers that can easily see a majority of the lake. One tower can 
> > see most of the north end and the other 2 can see south and east.
> >
> > So the challenge is to provide a content streaming connection to this boat 
> > which moves slowly across the lake.
> > My answer first was use an omni on 3Ghz but the omni has downtilt built in 
> > so thats a no go.
> > The plan B was to use a 4 cluster of integrated subscribers to talk to the 
> > towers.
> > The next question would be if these subs are able to move from one ap to 
> > the next.
> > How would you connect them to a router IE:RB493G to provide a single 
> > seemless connection in the boat?
> >
> > Im open to anything at this point. Oh yeah there is a Mobile hotspot for 
> > failover.
> >
> > I think I know the answer but wanted to see what others would do.
> >
> > Thanks
> > Dave
> >
> > --
> > <Vcard.jpg>

Reply via email to