Not in the office. In a deposition.
From: Faisal Imtiaz
Sent: Thursday, October 05, 2017 10:43 AM
To: af@afmug.com
Subject: Re: [AFMUG] Fw: AF11x adapters
Tried to call you.. but they said you were not there.. !
The snap adapter you have in the picture is the piece from the back side of the
AF11x
If you look at the picture I sent you.. that is of an AF11x mounting on the
Jirous Adapter, after removing the snap adapter.
So the hole patterns of the flat side of the snap adapter will match exactly
what is on the Radio ...
Regards.
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net
--------------------------------------------------------------------------------
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: Thursday, October 5, 2017 12:24:10 PM
Subject: Re: [AFMUG] Fw: AF11x adapters
I think there is a difference in the hole pattern between the snap adapter
and the radio.
From: Faisal Imtiaz
Sent: Thursday, October 05, 2017 10:20 AM
To: af@afmug.com
Subject: Re: [AFMUG] Fw: AF11x adapters
Quick simple fix would be to create some sort of a stand-off and use longer
screws to bolt the radio in place.
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net
------------------------------------------------------------------------------
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: Thursday, October 5, 2017 12:09:49 PM
Subject: Re: [AFMUG] Fw: AF11x adapters
I will supply them in all future shipments.
From: Gino A. Villarini
Sent: Thursday, October 05, 2017 10:08 AM
To: af@afmug.com
Subject: Re: [AFMUG] Fw: AF11x adapters
Just clarified, the plastic adapter does not come with the radio, will need
to retool base to use holes in metal adapter
From: Af <af-boun...@afmug.com> on behalf of Jeremy <jeremysmi...@gmail.com>
Reply-To: "af@afmug.com" <af@afmug.com>
Date: Thursday, October 5, 2017 at 11:33 AM
To: "af@afmug.com" <af@afmug.com>
Subject: Re: [AFMUG] Fw: AF11x adapters
They sell it in a set with the 11GHz Type-N cables. Streakwave has some in
stock. AF-11CA $52
Gino A. Villarini
President
Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968
On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <fai...@snappytelecom.net>
wrote:
Hmmm... in that case.. the question would be... How do you mount the
radio to the Adapter plate.
There needs to be a mateing adapter on your plate side... That piece only
comes with the UBNT Dish...
(you can pull up the UBNT 10ghz Dish Userguide to see that ...)
Jiruos adapters that we used, required that piece to be removed from the
AF11x so that it could be screwed in directly (as per my picture). I was told
that they were going to redesign so that they would have a mateing bracket on
their side so that the AF11x would slide in.
(You will also need to have to include cables to connect to AF11x to the
Feed horn .. I am sure you already knew that).
Regards
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net
--------------------------------------------------------------------------
From: ch...@wbmfg.com
To: af@afmug.com
Sent: Thursday, October 5, 2017 10:45:45 AM
Subject: Re: [AFMUG] Fw: AF11x adapters
No because my design presumes the adapter will be there to space the
radio out away from the end of the waveguide transition. Without that extra
spacing the radio would crash into the end of the adapter.
From: Mathew Howard
Sent: Thursday, October 5, 2017 8:42 AM
To: af
Subject: Re: [AFMUG] Fw: AF11x adapters
Wouldn't it work without the adapter anyway? If I'm remembering right,
with the Jirous adapters, you take the snap adapter off and just bolt the radio
directly to their mounting plate using the same holes... wouldn't that line up
with your adapter too?
On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote:
If that plastic slide/snap adapter is included with each radio, then
we should be good.
I designed the spacing and everything assuming that adapter would be
used with each unit.
From: Faisal Imtiaz
Sent: Thursday, October 5, 2017 8:28 AM
To: af@afmug.com
Subject: Re: [AFMUG] Fw: AF11x adapters
Picture of the Jirous Adapter attached....
rest of the answers are inline below.
If you have any questions, feel free to call me.
Regards.
Faisal Imtiaz
Snappy Internet & Telecom
7266 SW 48 Street
Miami, FL 33155
Tel: 305 663 5518 x 232
Help-desk: (305)663-5518 Option 2 or Email: supp...@snappytelecom.net
----------------------------------------------------------------------
From: "Chuck McCown" <ch...@wbmfg.com>
To: af@afmug.com
Sent: Thursday, October 5, 2017 8:58:26 AM
Subject: [AFMUG] Fw: AF11x adapters
Made Gino some adapters so he can use AF11x radios on Remec mount
antennas.
I made the hole pattern to match a plastic slide and snap adapter
that came with the radio I have.
That should be fine
But not sure if that part is included with all AF11X radios. Gino
is asking about how the radio is supposed to mount to my adapter.
If the slide/snap is not automatically included in all shipments, I
need to alter the bolt pattern to allow mounting of the radio when that part is
not present. He needs some more of these adapters and I want to make sure to
send him stuff that does not require any work on his part.
Do you AF11X users know if that slid/snap adapter plate is included
with all radios?
Yes that slide/snap adapter is included with each of the AF11x (That
is how they slide/attach to the UBNT dishes).
If so, can we buy more for Gino to use right now in the event he
has lost his? If not how should I alter the mount so the radio can still fit
onto the adapter?
