Yeah, in your picture it doesn't look like they'll line up. If you needed to make it work in a pinch, a guy could probably just drill a new set of holes, find some longer screws and use the bracket on the radio as a spacer.
On Thu, Oct 5, 2017 at 11:24 AM, Chuck McCown <ch...@wbmfg.com> wrote: > I think there is a difference in the hole pattern between the snap adapter > and the radio. > > *From:* Faisal Imtiaz > *Sent:* Thursday, October 05, 2017 10:20 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Fw: AF11x adapters > > Quick simple fix would be to create some sort of a stand-off and use > longer screws to bolt the radio in place. > > Faisal Imtiaz > Snappy Internet & Telecom > 7266 SW 48 Street > <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> > Miami, FL 33155 > <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> > Tel: 305 663 5518 <(305)%20663-5518> x 232 > > Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: > supp...@snappytelecom.net > > ------------------------------ > > *From: *"Chuck McCown" <ch...@wbmfg.com> > *To: *af@afmug.com > *Sent: *Thursday, October 5, 2017 12:09:49 PM > *Subject: *Re: [AFMUG] Fw: AF11x adapters > > I will supply them in all future shipments. > > *From:* Gino A. Villarini > *Sent:* Thursday, October 05, 2017 10:08 AM > *To:* af@afmug.com > *Subject:* Re: [AFMUG] Fw: AF11x adapters > > Just clarified, the plastic adapter does not come with the radio, will > need to retool base to use holes in metal adapter > > From: Af <af-boun...@afmug.com> on behalf of Jeremy < > jeremysmi...@gmail.com> > Reply-To: "af@afmug.com" <af@afmug.com> > Date: Thursday, October 5, 2017 at 11:33 AM > To: "af@afmug.com" <af@afmug.com> > Subject: Re: [AFMUG] Fw: AF11x adapters > > They sell it in a set with the 11GHz Type-N cables. Streakwave has some > in stock. AF-11CA $52 > > > > > *Gino A. Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > > On Thu, Oct 5, 2017 at 8:51 AM, Faisal Imtiaz <fai...@snappytelecom.net> > wrote: > >> Hmmm... in that case.. the question would be... How do you mount the >> radio to the Adapter plate. >> >> There needs to be a mateing adapter on your plate side... That piece only >> comes with the UBNT Dish... >> >> (you can pull up the UBNT 10ghz Dish Userguide to see that ...) >> >> Jiruos adapters that we used, required that piece to be removed from the >> AF11x so that it could be screwed in directly (as per my picture). I was >> told that they were going to redesign so that they would have a mateing >> bracket on their side so that the AF11x would slide in. >> >> (You will also need to have to include cables to connect to AF11x to the >> Feed horn .. I am sure you already knew that). >> >> Regards >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> >> Miami, FL 33155 >> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> >> Tel: 305 663 5518 x 232 <(305)%20663-5518> >> >> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: >> supp...@snappytelecom.net >> >> ------------------------------ >> >> *From: *ch...@wbmfg.com >> *To: *af@afmug.com >> *Sent: *Thursday, October 5, 2017 10:45:45 AM >> *Subject: *Re: [AFMUG] Fw: AF11x adapters >> >> No because my design presumes the adapter will be there to space the >> radio out away from the end of the waveguide transition. Without that >> extra spacing the radio would crash into the end of the adapter. >> >> *From:* Mathew Howard >> *Sent:* Thursday, October 5, 2017 8:42 AM >> *To:* af >> *Subject:* Re: [AFMUG] Fw: AF11x adapters >> >> Wouldn't it work without the adapter anyway? If I'm remembering right, >> with the Jirous adapters, you take the snap adapter off and just bolt the >> radio directly to their mounting plate using the same holes... wouldn't >> that line up with your adapter too? >> >> On Thu, Oct 5, 2017 at 9:33 AM, <ch...@wbmfg.com> wrote: >> >>> If that plastic slide/snap adapter is included with each radio, then we >>> should be good. >>> I designed the spacing and everything assuming that adapter would be >>> used with each unit. >>> >>> *From:* Faisal Imtiaz >>> *Sent:* Thursday, October 5, 2017 8:28 AM >>> *To:* af@afmug.com >>> *Subject:* Re: [AFMUG] Fw: AF11x adapters >>> >>> Picture of the Jirous Adapter attached.... >>> >>> rest of the answers are inline below. >>> >>> If you have any questions, feel free to call me. >>> >>> Regards. >>> >>> Faisal Imtiaz >>> Snappy Internet & Telecom >>> 7266 SW 48 Street >>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> >>> Miami, FL 33155 >>> <https://maps.google.com/?q=7266+SW+48+Street+Miami,+FL+33155&entry=gmail&source=g> >>> Tel: 305 663 5518 <(305)%20663-5518> x 232 >>> >>> Help-desk: (305)663-5518 <(305)%20663-5518> Option 2 or Email: >>> supp...@snappytelecom.net >>> >>> ------------------------------ >>> >>> *From: *"Chuck McCown" <ch...@wbmfg.com> >>> *To: *af@afmug.com >>> *Sent: *Thursday, October 5, 2017 8:58:26 AM >>> *Subject: *[AFMUG] Fw: AF11x adapters >>> >>> >>> Made Gino some adapters so he can use AF11x radios on Remec mount >>> antennas. >>> I made the hole pattern to match a plastic slide and snap adapter that >>> came with the radio I have. >>> >>> That should be fine >>> >>> But not sure if that part is included with all AF11X radios. Gino is >>> asking about how the radio is supposed to mount to my adapter. >>> If the slide/snap is not automatically included in all shipments, I need >>> to alter the bolt pattern to allow mounting of the radio when that part is >>> not present. He needs some more of these adapters and I want to make sure >>> to send him stuff that does not require any work on his part. >>> Do you AF11X users know if that slid/snap adapter plate is included with >>> all radios? >>> >>> Yes that slide/snap adapter is included with each of the AF11x (That is >>> how they slide/attach to the UBNT dishes). >>> >>> If so, can we buy more for Gino to use right now in the event he has >>> lost his? If not how should I alter the mount so the radio can still fit >>> onto the adapter? >>> >>> >> >> > >
