For 2+0 you just use an OMT that splits the H and V polarities out separately. It’s a piece of hardware that you put on both sides attached to the dish.
> On Nov 28, 2017, at 3:01 PM, Steve Jones <[email protected]> wrote: > > the most i could get on the integra in their calculator is 643, but it doesnt > have option for 2+0 > > On Tue, Nov 28, 2017 at 3:42 PM, Sean Heskett <[email protected] > <mailto:[email protected]>> wrote: > SAF Integra-GS 2+0 > > http://saftehnika.com/en/integrags <http://saftehnika.com/en/integrags> > > -Sean > > On Tue, Nov 28, 2017 at 1:28 PM Steve Jones <[email protected] > <mailto:[email protected]>> wrote: > We have a phenomenal saf lumina link we get 366 out of. I can 2+0 this to get > to 732. using the existing 3 and 4 foot antennas > > I wouldnt mind seeing a little more of our gigabit upstream connectivity > utilized here, somewhere along the same price using the same antennas > > Im not at all impressed with the mimosa gear, its not full duplex and putting > that much variable latency into the network bringing our bandwidth into the > core of our network just seems like moving backward. > > before I give my blessing, for what its worth, to the boss to order the SAF > gear, I just want to make sure there isnt a better option. Lumina is older > and nearing EOL im guessing, we have other places the units can be used. > > on the same note, we bring this bandwidth up from the fiber by AF24 700 feet, > so probably should ask about a 24ghz (or anything) short link solution. Im > assuming af24hd will meet that need >
