It's just a wood box covered in vinyl. On Tue, May 15, 2018 at 3:08 PM, Josh Luthman <j...@imaginenetworksllc.com> wrote:
> The chimney has vinyl? I assume it's brick behind it? > > If you have to get it from the local hardware store, go there and see what > all can work. I'd probably look for the best tool rather than limit myself > to that one store, though. > > > Josh Luthman > Office: 937-552-2340 > Direct: 937-552-2343 > 1100 Wayne St > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > Suite 1337 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > Troy, OH 45373 > <https://maps.google.com/?q=1100+Wayne+St+Suite+1337+Troy,+OH+45373&entry=gmail&source=g> > > On Tue, May 15, 2018 at 3:07 PM, Jason McKemie < > j.mcke...@veloxinetbroadband.com> wrote: > >> Anyone have any advice as to what hardware I can use to attach a 6' >> section of 1.5" emt to a chimney? It's the vinyl siding covered type. I was >> thinking of just drilling it and running lags straight through, but a >> bracket of some type, possibly utilizing pipe clamps, would be preferred. >> I'll need to source it from a local hardware store. > > >