Stick a piece of PVC down the chimney and use spray foam to hold it in place.
From: Jason McKemie
Sent: Tuesday, May 15, 2018 5:28 PM
To: af@afmug.com
Subject: Re: [AFMUG] Attaching pole to Chimney
Do the unistrut conduit clamps hold the conduit tightly enough to mount it
vertically? I thought they were intended for horizontal runs.
On Tuesday, May 15, 2018, Sam Lambie <samtaos...@gmail.com> wrote:
Unistrut, clamps and EMT. Done
On Tue, May 15, 2018 at 2:46 PM, Jason McKemie
<j.mcke...@veloxinetbroadband.com> wrote:
It's just a wood box covered in vinyl.
On Tue, May 15, 2018 at 3:08 PM, Josh Luthman <j...@imaginenetworksllc.com>
wrote:
The chimney has vinyl? I assume it's brick behind it?
If you have to get it from the local hardware store, go there and see
what all can work. I'd probably look for the best tool rather than limit
myself to that one store, though.
Josh Luthman
Office: 937-552-2340
Direct: 937-552-2343
1100 Wayne St
Suite 1337
Troy, OH 45373
On Tue, May 15, 2018 at 3:07 PM, Jason McKemie
<j.mcke...@veloxinetbroadband.com> wrote:
Anyone have any advice as to what hardware I can use to attach a 6'
section of 1.5" emt to a chimney? It's the vinyl siding covered type. I was
thinking of just drilling it and running lags straight through, but a bracket
of some type, possibly utilizing pipe clamps, would be preferred. I'll need to
source it from a local hardware store.
--
--
Sam Lambie
Taosnet Wireless Tech.
575-758-7598 Office
www.Taosnet.com
