To comment on the following update, log in, then open the issue:
http://www.openoffice.org/issues/show_bug.cgi?id=4499
------- Additional comments from [EMAIL PROTECTED] Sun Mar 9 15:27:19 +0000
2008 -------
Vtdiy, I would not recommend putting such a setting in "Format". To me, the
most logical place to ask about export resolution is when you export, which
would be in the export dialog. If you do write up something, see my previous
posting- there are at least four things that need to be addressed:
1) The DPI setting has no effect when exporting
2) The maximum resolution for raster exporting is too low
3) There is no user choice in export resolution
4) There is no user feedback for actual resolution during an export
Just asking the user for (an honoring) a resolution is only 2 of the 4 issues.
I would also caution against only using the term "DPI", since exporting really
has nothing to do with Dots Per Inch... that is only meaningful when printing.
It is better to relay resolution in total pixels (like "1650x1275") or show both
(like "150DPI 1650x1275"). For the ultimate in convenience, show and let the
user set any of DPI, resolution, and Megapixels ("150 DPI 1650x1275 2.1 MP"),
then the user wouldn't have to do any math :)
I could see adding a 5, to the above, also:
5) There is no place to set the default export resolution
Which would probably be in Tools->Options
---------------------------------------------------------------------
Please do not reply to this automatically generated notification from
Issue Tracker. Please log onto the website and enter your comments.
http://qa.openoffice.org/issue_handling/project_issues.html#notification
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
