On Mon, Jul 01, 2002 at 12:29:09PM +0000, vanDongen/Gilcher wrote: > I am using a rme 96/8 card. > I encounter a problem whenever I try to open the adat device, which is the > second device on the card, for capture. I get an input/output error. > The problem occurs when I switch from spdif to adat (from hw:0,0 to hw:0,1 > in my case) _and_ the clock mode is master. If I set the card to slave mode > and change the settings on my adda converter, there is no problem. > Playback only will always work. > So f.i. if I start pd, with hw:0,1 as audio device, I have to start once , > with an error message that it can't open the card for capture. Then I quit, > and start pd again. > The second time it works for capture as well as for playback. > > Is this a bug in the driver? >
First a queston for all clockmode users: Can you set the clock mode to master without specifying a frequency? I have no experiences, but I've specified three master modes for the rme32 (for each sample rate). Maybe that's a mistake, but it looks more plausible for me, than one master mode (like rme96) with an undefined sample rate. Maybe we need a real experiment here. martin ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
