On Monday 01 July 2002 14.29, you wrote: > Hello, > I am using a rme 96/8 card. > I encounter a problem whenever I try to open the adat device, which > is the second device on the card, for capture. I get an input/output > error. The problem occurs when I switch from spdif to adat (from > hw:0,0 to hw:0,1 in my case) _and_ the clock mode is master. If I set > the card to slave mode and change the settings on my adda converter, > there is no problem. Playback only will always work. > So f.i. if I start pd, with hw:0,1 as audio device, I have to start > once , with an error message that it can't open the card for capture. > Then I quit, and start pd again. > The second time it works for capture as well as for playback. > > Is this a bug in the driver?
I'm in a mess of work right now, so I cannot look into this for a while, but it may be a bug in the driver. ADAT is the least tested mode (by me at least). /Anders Torger ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-devel
