Asaf Gery wrote:
> If snddevices works for you, then you're very very close to the solution.
> I bet on /etc/devfsd.conf ... Do you have audio user and group?
> In the original documentation there is audio.audio permissions to the sound
> devices. On my RedHat 7.1 there is no user/group audio/audio. Maybe this is
> the problem?
> I know it's frustrating...
> It took me a few months to get it running :-) Please send your
> /etc/modules.conf and /etc/devfsd.conf and I'll do my best to help you...
modules.conf :
alias parport_lowlevel parport_pc
alias scsi_hostadapter atp870u
alias eth0 8139too
alias char-major-81 bttv
alias snd-card-0 snd-card-als4000
alias sound-slot-0 snd-card-als4000
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
post-install sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -L
>/dev/null 2>&1 || :
pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S
>/dev/null 2>&1 || :
alias char-major-195 NVdriver
modules.devfs
# /etc/modules.devfs
# Richard Gooch <[EMAIL PROTECTED]> 16-JUL-2001
#
# THIS IS AN AUTOMATICALLY GENERATED FILE. DO NOT EDIT!!!
# THIS FILE WILL BE OVERWRITTEN EACH TIME YOU INSTALL DEVFSD!!!
# Modify /etc/modules.conf instead.
# This file comes with devfsd-v1.3.18 which is available from:
# http://www.atnf.csiro.au/~rgooch/linux/
# or directly from:
#
ftp://ftp.atnf.csiro.au/pub/people/rgooch/linux/daemons/devfsd-v1.3.18.tar.gz
###############################################################################
# Sample configurations that you may want to place in /etc/modules.conf
#
alias
/dev/snd snd-card-0
#alias
/dev/snd/seq snd-seq
#alias
/dev/v4l bttv
#alias
/dev/misc/watchdog pcwd
#alias
gen-md raid0
#alias
/dev/joysticks joystick
#probeall
scsi-hosts
sym53c8xx
###############################################################################
# Generic section: do not change or copy
#
# All HDDs
probeall /dev/discs scsi-hosts sd_mod ide-probe-mod ide-disk DAC960
alias /dev/discs/* /dev/discs
# All CD-ROMs
probeall /dev/cdroms scsi-hosts sr_mod ide-probe-mod ide-cd cdrom
alias /dev/cdroms/* /dev/cdroms
# All tapes
probeall /dev/tapes scsi-hosts st ide-probe-mod ide-tape
alias /dev/tapes/* /dev/tapes
# All SCSI devices
probeall /dev/scsi scsi-hosts sd_mod sr_mod st sg
# All IDE devices
probeall /dev/ide ide-probe-mod ide-disk ide-cd ide-tape ide-floppy
# IDE CD-ROMs
alias /dev/ide/*/cd ide-cd
# SCSI HDDs
probeall /dev/sd scsi-hosts sd_mod
alias /dev/sd* /dev/sd
# SCSI CD-ROMs
probeall /dev/sr scsi-hosts sr_mod
alias /dev/sr* /dev/sr
alias /dev/scsi/*/cd sr_mod
# SCSI tapes
probeall /dev/st scsi-hosts st
alias /dev/st* /dev/st
alias /dev/nst* /dev/st
# SCSI generic
probeall /dev/sg scsi-hosts sg
alias /dev/sg* /dev/sg
alias /dev/scsi/*/generic /dev/sg
# Floppies
alias /dev/floppy floppy
alias /dev/fd* floppy
# RAMDISCs
alias /dev/rd rd
alias /dev/ram* rd
# Loop devices
alias /dev/loop* loop
# Meta devices
alias /dev/md* gen-md
# Parallel port printers
alias /dev/printers* lp
alias /dev/lp* /dev/printers
# Soundcard
alias /dev/audio /dev/sound
alias /dev/mixer /dev/sound
alias /dev/dsp /dev/sound
alias /dev/dspW /dev/sound
alias /dev/midi /dev/sound
# Joysticks
alias /dev/js* /dev/joysticks
# Serial ports
alias /dev/tts* serial
alias /dev/ttyS* /dev/tts
alias /dev/cua* /dev/tts
# Miscellaneous devices
alias /dev/misc/atibm atixlmouse
alias /dev/misc/inportbm msbusmouse
alias /dev/misc/logibm busmouse
alias /dev/misc/rtc rtc
alias /dev/rtc /dev/misc/rtc
# PPP devices
alias /dev/ppp* ppp_generic
# Video capture devices
alias /dev/video* /dev/v4l
alias /dev/vbi* /dev/v4l
# Pull in the configuration file. Do this last because modprobe(8)
processes in
# per^H^H^Hreverse order and the sysadmin may want to over-ride what is
in the
# generic file
include /etc/modules.conf
devfsd.conf
# Sample /etc/devfsd.conf configuration file.
# Richard Gooch <[EMAIL PROTECTED]> 3-JUL-2000
#
# Enable full compatibility mode for old device names. You may comment these
# out if you don't use the old device names. Make sure you know what you're
# doing!
REGISTER
.*
MKOLDCOMPAT
UNREGISTER
.*
RMOLDCOMPAT
# You may comment out the above and uncomment the following if you've
# configured your system to use the original "new" devfs names or the really
# new names
#REGISTER
vc/.*
MKOLDCOMPAT
#UNREGISTER
vc/.*
RMOLDCOMPAT
#REGISTER
pty/.*
MKOLDCOMPAT
#UNREGISTER
pty/.*
RMOLDCOMPAT
#REGISTER
misc
MKOLDCOMPAT
#UNREGISTER
misc
RMOLDCOMPAT
# You may comment these out if you don't use the original "new" names
REGISTER
.*
MKNEWCOMPAT
UNREGISTER
.*
RMNEWCOMPAT
# Enable module autoloading. You may comment this out if you don't use
# autoloading
LOOKUP
.* MODLOAD
#
# Uncomment this if you want permissions to be saved and restored
# Do not do this for pseudo-terminal devices
#REGISTER
^pt[sy]/.*
IGNORE
#CHANGE
^pt[sy]/.* IGNORE
#REGISTER
.*
COPY /dev-state/$devname $devpath
#CHANGE
.* COPY $devpath /dev-state/$devname
#CREATE
.* COPY $devpath /dev-state/$devname
#
# Uncomment this if you want the old /dev/cdrom symlink
# (e.g. those specifying CD-ROM type, mouse port, modem port etc)
#
#LOOKUP
^cdrom$ CFUNCTION GLOBAL symlink cdroms/cdrom0 $devpath
#REGISTER
^cdrom/cdrom0$
CFUNCTION GLOBAL symlink cdroms/cdrom0 cdrom
#UNREGISTER
^cdrom/cdrom0$
CFUNCTION GLOBAL unlink cdrom
# For alsa modules ... hope this helps ....
LOOKUP snd MODLOAD ACTION snd
REGISTER sound/.* PERMISSIONS root.user 660
REGISTER snd/.* PERMISSIONS root.user 660
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
