At Sun, 1 Dec 2002 02:01:32 +0100, Christian Tramnitz wrote: > > Takashi, > > >which chip model are you using? the model number is shown > >/proc/asound/cards. cmipci chip behaves a bit differently > >depending on the chip model. > > Its model 55: > # cat /proc/asound/cards > 0 [CMI8738MC6 ]: CMI8738-MC6 - C-Media PCI CMI8738-MC6 > C-Media PCI CMI8738-MC6 (model 55) at 0xe000, irq > 10 > > > >anyway, i guess it's a mixer config problem. > >to check the input signals from spdif-in, it's easy to use "monitor". > >turn on "IEC958 In Monitor" switch via your mixer program (e.g. > alsamixer). > >turn off "IEC958 In Phase Inverse", and choose the correct slot from > "IEC958 In Select". > > Tried that, now I get the sound which comes through SPDIF-In via > Loop-mode, but that was not the goal ;-)
do you mean, the loop-back spdif in -> spdif out? could you attach your /etc/asound.state? Takashi ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user