On Sun, 2004-01-25 at 13:48, Bill Unruh wrote: > No, those lines (/dev/mixer, /dev/dsp,...) are NOT needed in /etc/modules.conf, and > may get in the > way of the assignment of the devices. If OSS emulation is running > properly those devices will get set up automatically.
I'll try removing them later today. I found 100's of examples of other people using these just using Google for a moment, so it's clear I'm not doing this on my own. I don't know how this interacts with devfsd also... > > Bus 001 Device 005: ID 0763:1110 Midiman > > Wizard root # > > > > Note the change to (0763:1110) > > The midiman sport probably needs its firmware loaded onto the card befor > it will work. I do not know that card, but am busting my head on the > Maudio Transit, which certainly does need firmware loaded (and which > someone who knows USB could probably do in 5 min-- I have the Windows > output usb-sniffer 1.8 ) > > Typicaly the product ID changes when the firmware is loaded. I do not > know which of 1110 or 1001 are the loaded and which the unloaded in your > case. 1001 was firmware unloaded. 1110 was firmware loaded. - Mark ------------------------------------------------------- The SF.Net email is sponsored by EclipseCon 2004 Premiere Conference on Open Tools Development and Integration See the breadth of Eclipse activity. February 3-5 in Anaheim, CA. http://www.eclipsecon.org/osdn _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user