> just got the audiophile 2496, which seems to be a right nice card. i have it > playing out and recording, but not at the same time. in envy24control i set > both of the "H/W Out" channels to either "PCM Out" or "H/W In". switching > between these settings, and the associated asoundrcs, is the only way i have > found to use both input & output.
Use 'Digital Mix' from the patchbay for H/W Out 1&2, this way you'll hear the inputs and outputs mixed, and you can control the volumes from the Monitor Mixer. > the card describes itself as full-duplex though, and i can see both signals > in the envy24control monitor. (i don't know why there are 10 "PCM Out"s, 8 > "H/W In"s, and 2 "S/PDIF In"s labeled L/R it's the envy chip, it has 10 channels (or was it 12) You can record the digital mixer from channels 11&12 (or was it 9&10) > any advice on this card's usage would be appreciated. i have read what i > found in the mail archives and seen a lot of asoundrcs. i think i have the > basic setup complete because i can play to and record from it using > plughw:2,0. full-duplexing and understanding the arrangement of channels is > my main concern right now. Feel free to ask. Tommi Uimonen ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ Alsa-user mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/alsa-user
