John,
Oddly enough I have another server (with two clients, including
itself) of the same architecture and running the programs from
the crossmounted disks on the server we have been talking about.
This system doesn't exibit the ERROR: Running as user... message
but is giving the secure port error.
laksha 5% /usr/local/sbin/amcheck laksha
Amanda Tape Server Host Check
-----------------------------
WARNING: holding disk /amanda/work: only 87589256 KB free (92160000 KB requested)
NOTE: skipping tape-writable test
Tape LAKSHA02 label ok
NOTE: info dir /amanda/laksha/curinfo: does not exist
NOTE: it will be created on the next run
Server check took 16.566 seconds
Amanda Backup Client Hosts Check
--------------------------------
ERROR: laksha: [host laksha: port 1145 not secure]
ERROR: andaman: [host laksha: port 1145 not secure]
Client check: 2 hosts checked in 0.517 seconds, 2 problems found
(brought to you by Amanda 2.4.2p2)
Again, IRIX 6.5 (6.5.14m actually, for both client and server).
thanks,
Brian
===
>
> John,
>
> Just running the checklist...
>
> did run the make install from root.
>
> Not sure which switches I through yesterday but found that
> /usr/local/sbin/amcheck had been owned by amanda rather than
> root. Other suid programs where already correctly set (but
> no longer sure if it was by myself or the installation).
>
> For the record the executables are...
>
> /usr/local/libexec/ calcsize
> dumper
> killgroup
> planner
> rundump
> runtar
>
> /usr/local/sbin/ amcheck
>
> Not that we are utilizing all executables (we aren't for instance
> using tar) nor at this point can I say this isn't SGI 6.5 specific.
>
> Needed to g+w on /etc/dumpdates on all clients.
> Needed to g+rw on /dev/rdsk/* on all clients.
>
> Amcheck now runs correctly with only one remaining error message.
>
> bali 8% /usr/local/sbin/amcheck bali
> Amanda Tape Server Host Check
> -----------------------------
> ERROR: running as user "amanda" instead of "root"
> Holding disk /usr1/amandawork: 10197064 KB disk space available, that's plenty
> NOTE: skipping tape-writable test
> Tape BALI11 label ok
> Server check took 5.394 seconds
>
> Amanda Backup Client Hosts Check
> --------------------------------
> ERROR: running as user "amanda" instead of "root"
> Client check: 4 hosts checked in 0.092 seconds, 0 problems found
>
> (brought to you by Amanda 2.4.2p2)
>
> Last note. This configuration runs on IRIX 6.5.x client and server.
> Running on Solaris (7 and up) we experienced no problems with the
> --with-user=amanda --with-group=sys configuration.
>
> I'm certain I have mixed architecture cleint/server configurations
> as well but thought I'd get the single architecture ones done first.
>
> thanks,
>
> Brian
>
> =====================================================================
>
> > >ERROR: sicily: [host bali: port 11834 not secure]
> >
> > See this FAQ item:
> >
> > http://amanda.sourceforge.net/fom-serve/cache/14.html
> >
> > > Brian
> >
> > John R. Jackson, Technical Software Specialist, [EMAIL PROTECTED]
>
