Hello guys, I am trying to do a full backup of 03 filesystems (127 GB), and my tape is an AIT 50/130 GB tape driver.
My amcheck is OK, no problems found ... Amdump simply don't work and report me this : > These dumps were to tape fita03. > *** A TAPE ERROR OCCURRED: [[writing file: No space left on device]]. > Some dumps may have been left in the holding disk. > Run amflush to flush them to tape. > The next tape Amanda expects to use is: a new tape. > > FAILURE AND STRANGE DUMP SUMMARY: > servarq.es /projeto2 lev 0 FAILED [dumps too big, 16044295 KB, but cannot incremental dump new disk] > servarq.es /projeto3 lev 0 STRANGE > servarq.es /projeto1 lev 0 FAILED [out of tape] > servarq.es /projeto1 lev 0 FAILED ["data write: Connection reset by peer"] > servarq.es /projeto1 lev 0 FAILED [dump to tape failed] > > > STATISTICS: > Total Full Daily > -------- -------- -------- > Estimate Time (hrs:min) 0:21 > Run Time (hrs:min) 11:56 > Dump Time (hrs:min) 5:18 5:18 0:00 > Output Size (meg) 17838.9 17838.9 0.0 > Original Size (meg) 33755.8 33755.8 0.0 > Avg Compressed Size (%) 52.8 52.8 -- > Filesystems Dumped 1 1 0 > Avg Dump Rate (k/s) 956.0 956.0 -- > > Tape Time (hrs:min) 5:19 5:19 0:00 > Tape Size (meg) 17838.9 17838.9 0.0 > Tape Used (%) 35.7 35.7 0.0 > Filesystems Taped 1 1 0 > Avg Tp Write Rate (k/s) 955.5 955.5 -- > > USAGE BY TAPE: > Label Time Size % Nb > fita03 5:19 17838.9 35.7 1 > > > FAILED AND STRANGE DUMP DETAILS: > > /-- servarq.es /projeto3 lev 0 STRANGE > sendbackup: start [servarq.estatica.com.br:/projeto3 level 0] > sendbackup: info BACKUP=/bin/gtar > sendbackup: info RECOVER_CMD=/bin/gtar -f... - > sendbackup: info end > ? gtar: ./projeto3/COMGAS-1463/Enrique/Cartas a Tramitar/oficio 04-08xx - CPTM - S\306o Paulo - 03.035 - 1.doc: Warning: Cannot stat: No such file or directory > ? gtar: ./projeto3/COMGAS-1463/Enrique/Cartas a Tramitar/oficio 04-08xx - CPTM - S\306o Paulo - 03.035 - 2.doc: Warning: Cannot stat: No such file or directory > ? gtar: ./projeto3/COMGAS-1463/Enrique/Cartas a Tramitar/oficio 04-08xx - METRO - S\306o Paulo - 03.035.doc: Warning: Cannot stat: No such file or directory > ? gtar: ./projeto3/COMGAS-1463/e-mail recebido ate/COMGAS/Fw_ Concorr\210ncia Elabora\207\306o Projeto Executivo - Bols\344es Av_ Jabaquara_Lino Coutinho_Winner_Cardoso Almeida_Ant\223nio Ambuda_Costa Marina_Ida Kolbi_ERS41_Ripasa Pap\202is Limeira.eml: Warning: Cannot stat: No such file or directory > ? gtar: ./projeto3/COMGAS-1463/e-mail recebido ate/COMGAS/Fw_ Concorr\210ncia Elabora\207\306o Projeto Executivo - Bols\344es Av_ Jabaquara_Lino Coutinho_Winner_Cardoso Almeida_Ant\223nio Ambuda_Costa Marina_Ida Kolbi_ERS41_Ripasa_Pap\202is Limeira.eml: Warning: Cannot stat: No such file or directory > | Total bytes written: 35395502080 (33GB, 1.8MB/s) > sendbackup: size 34565920 > sendbackup: end > \-------- > > /-- servarq.es /projeto1 lev 0 FAILED ["data write: Connection reset by peer"] > sendbackup: start [servarq.estatica.com.br:/projeto1 level 0] > sendbackup: info BACKUP=/bin/gtar > sendbackup: info RECOVER_CMD=/bin/gtar -f... - > sendbackup: info end > \-------- > > > NOTES: > planner: tapecycle (5) <= runspercycle (7) > planner: Adding new disk servarq.estatica.com.br:/projeto2. > planner: Adding new disk servarq.estatica.com.br:/projeto3. > planner: Adding new disk servarq.estatica.com.br:/projeto1. > taper: tape fita03 kb 43281440 fm 2 writing file: No space left on device > > > DUMP SUMMARY: > DUMPER STATS TAPER STATS > HOSTNAME DISK L ORIG-KB OUT-KB COMP% MMM:SS KB/s MMM:SS KB/s > -------------------------- --------------------------------- ------------ > servarq.esta /projeto1 0 FAILED --------------------------------------- > servarq.esta /projeto2 0 FAILED --------------------------------------- > servarq.esta /projeto3 0 3456592018267056 52.8 318:28 956.0 318:37 955.5 > > (brought to you by Amanda version 2.4.4p3) At my configuration file I use this options : define dumptype comp-high { > global > comment "very important partitions on fast machines" > compress client best > priority high > } > > Compress: I supose that option I used the best, but the slowest one, right ? What > the comprresion that is used at this option ? bzip2 ? At my disklist I use : > my_host.my_domain /dir1 comp-high > my_host.my_domain /dir2 comp-high > my_host.my_domain /dir3 comp-high > my_host.my_domain /dir4 comp-high Someone could help me ??? Am I providing enough information ? Regards, InfraNet Tecnologia Fábio M. A. Cunha (55 11) 5542-0941 ramal 22 (55 11) 9603-6377 www.infranetsp.com.br