> The complete output of mtx is not logged, run it on the command line to
> get the complete output:
> /usr/sbin/mtx -f /dev/changer nobarcode status
Storage Changer /dev/sg6:1 Drives, 7 Slots ( 0 Import/Export )
Data Transfer Element 0:Full (Storage Element 1 Loaded)
Storage Element 1:Empty
Storage Element 2:Full
Storage Element 3:Full
Storage Element 4:Full
Storage Element 5:Full
Storage Element 6:Full
Storage Element 7:Full
> 'it always works the 2nd time', Did it always works the 3rd and 4th
> time?
Yes, after the first fail, it always works. Then several days
later I try switching tapes and it fails again the first time and
always works again after that.
> When is the first time?
The "first time" is Monday morning after I've done a dump to the
holding disk. I do 6 amdumps during the week:
M degraded
T flush to tape
W degraded
Th degraded
F flush to tape
S degraded
Steve
--
Steven J. Backus Computer Systems Manager
University of Utah E-Mail: steven.bac...@utah.edu
Genetic Epidemiology Alternate: bac...@math.utah.edu
391 Chipeta Way -- Suite D Office: 801.587.9308
Salt Lake City, UT 84108-1266 http://www.math.utah.edu/~backus
