Hi Tristan, > I have been enjoying using AmForth on AVR hardware but have a project > in which I would like to use a physically smaller processor than a > AtMega328p 28 pin DIP. Before thinking about SMD I wondered if there > was a smaller DIP packaged processor that would run AmForth in the > MSP430 family? > > Am I correct in thinking that the lowest pin count MSP430 device that > can run AmForth would be a 20 pin one (such as MSP430G2x52)?
I use the G2553 as the primary MSP430 target, leaving 8KB code spaceĀ for user programs. All other devices with more ressources are either PDIP40 (the bigger AVR's) or SMD. There are so many ready-to-run boards available today... Even small ones like the arduino nano. I've never even tried to solder SMD devices myself. Matthias ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel