The crucial file to include for an ATmega is the confusingly named: "amforth-low.asm" which needs to be un-commented in template.asm.
All the code is then in low flash memory apart from the flash burning routine which should be found at NRWW_START_ADDR (0x01f000). Often, with a new device, you need to burn the fuses "make write-fuse", before flashing (and burning fuses for a second time) with "make install". -- Regards, Martin Nicholas. E-mail: reply-2...@mgn.org.uk (Address will be valid throughout 2021). _______________________________________________ Amforth-devel mailing list for http://amforth.sf.net/ Amforth-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/amforth-devel