I have a Belar AMM-1 and RFA-2 Set Available. I have done a visual inspection of the items inside and out. they are in great condition inside and out. I have replaced the HP style oval AC Jacks with the new "D" Style 3 pin Computer Jacks. the job was done nice and neat. I bench tested the AMM-1 Modulation function using a Radio Shack 70's Era Navaho Base Station. it was indicating about 90% neg. mod., positive mod. was over 133%. probably typical for a CB Radio. (no hillbilly jokes please). the RFA-2, i powered on and checked various points on the board for voltage indication. it seems functional. no smoke or burned parts anywhere. the RFA-2 is on 920khz., the calibration stickers show a 1995 calibration date. the RFA-2 has a sticker on the rear that says do not short center of RF in to ground. i'm assuming this has the 15v phantom power option to use with LP-1a Loop Antenna. I used my meter to test for 15vdc on the rf-in and got no idication of voltage on the jack. I can supply pic's of both units on request. i can take pic's of any angle. I'm looking to get $600.00 + Shipping on both units. assume they will need calibration.
Thank You, Rev. Robert P. Chrysafis Universal Life Ministries (ULC) http://www.ulc.org Moderator Hunterdonfree http://groups.yahoo.com/groups/hunterdonfree
