Can't you just run at reduced input by reducing the loading? Then run the tube(s) at the CCS rating. The power transformer should take that.
Bob K5MYJ ----- Original Message ----- From: "rbethman" <[EMAIL PROTECTED]> To: "Discussion of AM Radio in the Amateur Service" <amradio@mailman.qth.net> Sent: Sunday, November 23, 2008 12:14 PM Subject: Re: [AMRadio] Low Power AM? > George, > > Good question! There is NO mention of RTTY operation ANYWHERE in the > Apache Manual. > > I'm also not sure how you can safely reduce the power out put following > the tuning procedures, WITHOUT doing some damage to some components. > > It does just fine on AM and CW. Mixed results on SSB with the SB-10. > > Bob - N0DGN > > George Brand wrote: > > speaking of the DX series, at reduced power whats the max key down time say > > with rtty on these or other rigs like the DX-100 or Apaches?? > > > > George WA8SCO > > > > -- > Bob - NØDGN > > ______________________________________________________________ > Our Main Website: http://www.amfone.net > AMRadio mailing list > Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ > List Rules (must read!): http://w5ami.net/amradiofaq.html > List Home: http://mailman.qth.net/mailman/listinfo/amradio > Help: http://mailman.qth.net/mmfaq.html > Post: mailto:AMRadio@mailman.qth.net > To unsubscribe, send an email to [EMAIL PROTECTED] with > the word unsubscribe in the message body. > ______________________________________________________________ Our Main Website: http://www.amfone.net AMRadio mailing list Searchable Archives: http://www.mail-archive.com/amradio@mailman.qth.net/ List Rules (must read!): http://w5ami.net/amradiofaq.html List Home: http://mailman.qth.net/mailman/listinfo/amradio Help: http://mailman.qth.net/mmfaq.html Post: mailto:AMRadio@mailman.qth.net To unsubscribe, send an email to [EMAIL PROTECTED] with the word unsubscribe in the message body.