Sion, Glad the simple solution worked. For others reading this, if the simple solution does not work, try the complicated one I gave. I always use the File | Exit method of closing a program for exactly this reason. In my case, it didn't work.
73s, Alan WA4SCA -----Original Message----- From: amsat-bb-boun...@amsat.org [mailto:amsat-bb-boun...@amsat.org] On Behalf Of Sion Chow Q. C. Sent: Friday, August 05, 2011 8:50 AM To: Masahiro Arai Cc: amsat-bb@amsat.org Subject: [amsat-bb] Re: ARISSat-1 over West Malaysia Hi Maza-San, Just tried this and yes it works FB. Thank you for your help. And also thank you Alan for the reply. This is something that I could look out for future other problems with Windows 7. 73, Sion, 9M2CQC On 5 Aug 2011, at 09:07 PM, Masahiro Arai <m-a...@a.email.ne.jp> wrote: > Sion, > >> 1. Is it possible to have the callsign and forwarding telemetry option >> always set in ARISSsatTLM? This way, we do not have to manually enter >> the callsign and enable telemetry forwarding each time the program >> starts up. > > When you close ARISSatTLM, did you push X button on right upper corner? > This way could not save the setting in config file. > > Set your callsign and select File - Exit to close ARISSatTLM. Then the > config file is updated. You will find your callsing is keeping next > start up. > > I find this manner just today. > > > 73 > > > Masa JN1GKZ > > > > >> Dear All, >> >> It was great to receive ARISSsat-1 over West Malaysia during 5th >> August 2011, 0223 UTC pass. Maximum elevation was 89 degrees. >> >> The downlink of both 145.919 MHz USB and 145.950 MHz FM was 59+60db, >> very strong but with huge QSB observed. A total of 3 SSTV pictures >> were forwarded to the ARISS SSTV gallery and some telemetry/Kursk data >> were forwarded by ARISSatTLM. >> >> Congratulations to all those involved with ARISSsat-1 and we look >> forward to trying out the transponder on the next pass. >> >> A few questions I have if someone could please help me clarify them: >> 1. Is it possible to have the callsign and forwarding telemetry option >> always set in ARISSsatTLM? This way, we do not have to manually enter >> the callsign and enable telemetry forwarding each time the program >> starts up. >> 2. Does the CW beacon needs to be really +/- 100 Hz of the yellow >> line? The reason for this is that I would like to see how much offset >> should I apply to doppler control, for possible automated reception. >> 3. In low power (eclipse) mode, how often does the BPSK1000 telemetry >> transmits? >> >> Thank you. >> >> 73, >> Sion Chow Q. C., >> 9M2CQC, >> Also: WQ2C /HL1, 9V1QC, JG1XHM >> ex: 9W2QC, AB3IO >> >> >> >> _______________________________________________ >> Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. >> Not an AMSAT-NA member? Join now to support the amateur satellite program! >> Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > > > _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb
