Sion, exactly, the LO frequency of the FCD should be set to a fixed frequency, e.g. the center frequency of the pass band. You "move" the TUNE frequency with HDSDR through the spectrum according the doppler correction.
73, Mike DK3WN -----Ursprüngliche Nachricht----- Von: Sion Chow Q. C. (9W2QC) [mailto:9w...@9w2qc.net] Gesendet: Montag, 15. August 2011 10:47 An: Mike Rupprecht Cc: amsat-bb@amsat.org Betreff: Re: AW: [amsat-bb] Re: Decoding wideband recordings Mike, First of all, thank you for the very great software :) Just to clarify, in this case you will be tuning dopper at HDSDR instead of FCD control level? Which if I get it right will result in the I/Q of the pass being recorded without doppler control? 73, Sion, 9M2CQC Quoting Mike Rupprecht <m...@mike-rupprecht.de>: > Sion, > > another point to the DDE aspect: > > just working on the DDE link between SATCONTROL and HDSDR. At the moment > HDSDR supports only Orbitron (Doppler tracking interval 1s), HRD and > WXtrack. > > If I change the application name of SATCONTROL to Orbitron, the link can be > established and it works. The idea behind is to end the LO Frequency to the > FUNCubeDonge once - and keep it fix - BUT change the TUNE frequency of > HDSDR. This is possible in 1 Hz steps, so you can follow a narrowband signal > (CW/BPSK) much continuously. > (You can't change the LO Frequency of the FCD in 1 Hz steps). > > 73, Mike > DK3WN > > > If HDSDR could use the DDE output of WISP, it can start recording when > a satellite name appears, and stop when '*** NO Satellite ***' appears. > > These are just some of my thoughts to make automatic unattended > reception easier, but I must say that DK3WN's FCD control + HDSDR are > really great pieces of software. Thank you to all those involved in > their development :) > > 73, Sion, 9M2CQC > > > > > _______________________________________________ > Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. > Not an AMSAT-NA member? Join now to support the amateur satellite program! > Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb > > _______________________________________________ Sent via AMSAT-BB@amsat.org. Opinions expressed are those of the author. Not an AMSAT-NA member? Join now to support the amateur satellite program! Subscription settings: http://amsat.org/mailman/listinfo/amsat-bb