First, I want to thank everyone that has been helping me. This should
be one of the last questions for now. I wish that I can help the others
in the future as well.
> The Domain report is one issue. And then, some of the "search"
> reports are turn off.
>
> analog: Warning R: Turning off empty Search Query Report
> analog: Warning R: Turning off empty Search Word Report
> analog: Warning R: Turning off empty Internal Search Query Report
> analog: Warning R: Turning off empty Internal Search Word Report
>
> how do I verify if we have any data for these reports?
>The Search Word and Query Reports rely on the Referrer field, and on
the relevant Search Engine being defined in your Analog.cfg (there are a
couple of dozen of the more common ones listed in the default
analog.cfg).
>If you have any referrers from Google or Yahoo, then your Search Word
Reports should not be empty.
>The Internal Search Reports need you to define a particular URL on your
web server as a "search engine", and which field in the Query String is
the search term. The Internal Search Engine is not defined by default,
so it's reports will always be empty unless you've defined an Internal
Search Engine,
>Aengus
If my Search Word Reports shouldn't be empty, what might go wrong? Or,
where I should check first?
I have tried with following setup:
INTSEARCHWORD ON
INTSEARCHQUERY ON
INTSEARCHENGINE /Search.aspx keyword
FILEINCLUDE /Search.aspx*
ARGSINCLUDE /Search.aspx
But this will give me empty reports with warning messages saying all the
reports are empty.
For example,
analog: Warning R: Turning off empty Request Report
If I just use,
INTSEARCHWORD ON
INTSEARCHQUERY ON
INTSEARCHENGINE /Search.aspx keyword
Then, the Internal Search reports are still empty.
How can I fix this?
Thanks
Michael
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Aengus
Sent: Monday, December 01, 2008 4:53 PM
To: Support for analog web log analyzer
Subject: Re: [analog-help] Need help to retrieve (and correct)
allreports(need help on LOGFORMAT)
Leung, Michael <[EMAIL PROTECTED]> wrote:
> Aengus,
>
> The below is what we see for the Domain Report, but it is not what we
> are expecting.
>
> Listing domains, sorted by the amount of traffic.
>
> reqs %bytes domain
> 655193 100% [unresolved numerical addresses]
>
> Even it is entirely based on IP numbers, I should see a list of
> several IP addresses, instead of what we have now.
My mistake - it's actually the Organization Report that shows breakdown
by IP address when DNS resolution isn't enabled - the Domain Report
reports on Top Level Domains (.com, .org, .co.uk, etc) so it requires IP
names, not IP numbers.
The Organisation report lists the organizations (companies,
institutions, ISPs etc.) that the IP addresses are registered to. When
you only have IP numbers, the Organization Report basically breaks the
addresses down by "Class", so anything from 12.x.y.x will be listed
under 12, (a Class A address) but higher addresses will typically be
listed with 2 or more octets.
> But when I am using the above, instead of letting analog to use its
> auto-detect, I got the following error message in the output:
>
> analog: Warning L: Large number of corrupt lines in logfile
> /source_data1/weblog/datafiles/1.log: turn debugging on or try
> different
> LOGFORMAT
> (For help on all errors and warnings, see docs/errors.html)
> Current logfile format:
> %S - %j [%d/%M/%Y:%h:%n:%j %j] "%j %r %j" %c %b "%f" "%A" "%j"
> "%j" "-"\n
>
>
> what does it mean? Does it mean that I should this suggested format?
It means that not all of the lines in your logfile match the LOGFORMAT
that you told Analog to use. At a guess, the last field in your
logformat isn't always "-", so you might just want
LOGFORMATm (%S - %j [%d/%M/%Y:%h:%n:%j] "%j %r %j" %c %b "%f" "%A" %j)
> The Domain report is one issue. And then, some of the "search"
> reports are turn off.
>
> analog: Warning R: Turning off empty Search Query Report
> analog: Warning R: Turning off empty Search Word Report
> analog: Warning R: Turning off empty Internal Search Query Report
> analog: Warning R: Turning off empty Internal Search Word Report
>
> how do I verify if we have any data for these reports?
The Search Word and Query Reports rely on the Referrer field, and on the
relevant Search Engine being defined in your Analog.cfg (there are a
couple of dozen of the more common ones listed in the default
analog.cfg).
If you have any referrers from Google or Yahoo, then your Search Word
Reports should not be empty.
The Internal Search Reports need you to define a particular URL on your
web server as an "search engine", and which field in the Query String is
the search term. The Internal Search Engine is not defined by default,
so it's reports will always be empty unless you've defined an Internal
Search Engine,
Aengus
+-----------------------------------------------------------------------
-
| TO UNSUBSCRIBE from this list:
| http://lists.meer.net/mailman/listinfo/analog-help
|
| Analog Documentation: http://analog.cx/docs/Readme.html
| List archives: http://www.analog.cx/docs/mailing.html#listarchives
| Usenet version: news://news.gmane.org/gmane.comp.web.analog.general
+-----------------------------------------------------------------------
-
+------------------------------------------------------------------------
| TO UNSUBSCRIBE from this list:
| http://lists.meer.net/mailman/listinfo/analog-help
|
| Analog Documentation: http://analog.cx/docs/Readme.html
| List archives: http://www.analog.cx/docs/mailing.html#listarchives
| Usenet version: news://news.gmane.org/gmane.comp.web.analog.general
+------------------------------------------------------------------------
