On Wed, Jun 8, 2011 at 12:29 PM, Kristopher Micinski <[email protected]
> wrote:

>
>
> On Wed, Jun 8, 2011 at 11:20 AM, polyclefsoftware <[email protected]>wrote:
>
>> I have not done extensive testing, having only connected one master and
>> two slaves. My understanding is that the max slaves possible with bluetooth
>> is 7 or 8. The code contains 7 unique UUIDs, so I think it should support 1
>> master and 6 slaves (I don't have that many Android devices).
>>
>>
> A Bluetooth piconet can contain a maximum of 7 nodes, so this would be 1
> master and 6 slaves.  Greater topologies are possible by connecting masters
> and doing routing, but I know the standard Android API doesn't implement
> this.  I should check to see what the capabilities are with the Bluecove
> API.
>
>

Just to clarify, when I say "Standard Android API" I mean the SDK part
that's exposed to you, it's built on top of BlueZ, I believe.


> As for duration, again, I haven't done extensive testing. As I mentioned,
>> connectivity with my HTC Eris was sporadic. I would certainly be interested
>> to hear other experiences.
>>
>
> My experiences have been that it is possible with three nodes, as you
> mentioned.  When I was testing, the links seemed to have some predictable
> mean time to failure (I was using a Motorola Milestone, HTC G1, and another
> HTC phone), and because of this, it seems that when I connected a fourth
> (another g1) the times for a link failure would become less (as expected
> probabilistically).
>
> I was running an app which pretty much saturated the bandwidth of the
> devices, and I would say I was getting a long time (sometimes an hour or
> more) for maintained connections between two phones, and maybe 20-40 minutes
> between three phones.  The app was running network experiments that took
> around 20 minutes each, so link failure was a cause of concern.  Another
> thing that makes it a bit difficult is that connection time is pretty large
> (5-10 seconds?), so if the links are going down a lot, and you have to run a
> lot of experiments, it can take a while.
>
> Kris
>

-- 
You received this message because you are subscribed to the Google
Groups "Android Developers" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to
[email protected]
For more options, visit this group at
http://groups.google.com/group/android-developers?hl=en

Reply via email to